|
Water absorption test (Physico-chemical tests) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sample conditioning (Physico-chemical tests) |
|
|
|
|
|
|
|
|
|
|
|
UNE-EN 2823, EN 3615, ASTM D5229/D5229M, I+D-E-240, ASTM D5418, ISO 6270-2, ISO 291
|
|
(Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Adhesion of coatings by scrape adhesion (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Wet adhesion (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
ISO 2812-2, FED-STD-141, MIL-PRF-85285, MIL-PRF-23377, BATS 4860, I+D-E-103, BSS 7225, CMS-CT-201, NE 40-308, MEP 10-059, ASTM D3359, NE 40-143, NE 40-274, A2TS 4860, MEP 10-069, NE 40-333
|
|
Dry adhesion (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
ASTM D3359, BATS 4860, I+D-E-103, NE 40-143, BSS 7225, MEP 10-070, NE 40-164, MEP 10-069, NE 40-160, CMS-CT-201, NE 40-308, MEP 10-117, MEP 10-059, QCI 29-32, NE 40-274, BAMS 552-003, A2TS 4860, ISO 2409, AITM 2-0040, NE 40-333
|
|
Cross-cut adhesion test (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
ISO 2409, ASTM D3359, BATS 4860, AIPI 05-05-009, AITM 2-0040, A2TS 4860, BAMS 552-003, BSS 7225, I+D-E-103, MEP 10-117, NE 40-143, NE 40-274, NE 40-308, NE 40-333, MEP 10-059, A2MS 565-014
|
|
Analysis of non metallic materials by DSC (Thermal analysis) |
|
|
|
|
|
|
|
|
|
|
|
AITM 3-0002, AITM 3-0027, EFA-CFC-TP-017, ASTM D3418, I+D-E-241, I+D-E-125, IGC 04.26.137, AITM 3-0008, ASTM D3417, UNE-EN 6041, GPS-66204, ISO 11357-3, ISO 11357-2, ASTM E1356, MEP 09-063
|
|
Analysis of non metallic materials by DSC (Tests on film-type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
AITM 3-0002, AITM 3-0027, EFA-CFC-TP-017, ASTM D3418, I+D-E-241, I+D-E-125, IGC 04.26.137, AITM 3-0008, ASTM D3417, UNE-EN 6041, GPS-66204, ISO 11357-3, ISO 11357-2, ASTM E1356, MEP 09-063
|
|
Analysis of resin by FTIR (Physico-chemical tests) |
|
|
|
|
|
|
|
|
|
|
|
AITM 3-0003, ASTM E1252, I+D-E-241, IGC 04.26.130, I+D-E-125, prEN 6042, EFA-CFC-TP-020, NTA-62470, GPS-66207, ASTM E168
|
|
Analysis of resin by FTIR (Tests on film-type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
AITM 3-0003, ASTM E1252, I+D-E-241, IGC 04.26.130, I+D-E-125, prEN 6042, EFA-CFC-TP-020, NTA-62470, GPS-66207, ASTM E168
|
|
Phosphoric sulphuric acid anodising (PSA) (Electrochemical processes) |
|
|
|
|
|
|
|
|
|
|
|
AIPI 02-01-006, AIPS 02-01-006
|
|
Phosphoric sulphuric acid anodising (PSA) (Electrochemical processes) |
|
|
|
|
|
|
|
|
|
|
|
AIPI 02-01-006, AIPS 02-01-006
|
|
Phosphoric sulphuric acid anodising (PSA) () |
|
|
|
|
|
|
|
|
|
|
|
AIPI 02-01-006, AIPS 02-01-006
|
|
Sulphuric acid anodising (SAA) (Electrochemical processes) |
|
|
|
|
|
|
|
|
|
|
|
AIPI 02-01-002, AIPS 02-01-002, SAE-AMS-2471
|
|
Sulphuric acid anodising (SAA) (Electrochemical processes) |
|
|
|
|
|
|
|
|
|
|
|
AIPI 02-01-002, AIPS 02-01-002, SAE-AMS-2471
|
|
Sulphuric acid anodising (SAA) () |
|
|
|
|
|
|
|
|
|
|
|
AIPI 02-01-002, AIPS 02-01-002, SAE-AMS-2471
|
|
Tartaric sulphuric acid anodising (TSA) (Electrochemical processes) |
|
|
|
|
|
|
|
|
|
|
|
AIPI 02-01-003, AIPS 02-01-003, I+D-P-416
|
|
Tartaric sulphuric acid anodising (TSA) (Electrochemical processes) |
|
|
|
|
|
|
|
|
|
|
|
AIPI 02-01-003, AIPS 02-01-003, I+D-P-416
|
|
Tartaric sulphuric acid anodising (TSA) () |
|
|
|
|
|
|
|
|
|
|
|
AIPI 02-01-003, AIPS 02-01-003, I+D-P-416
|
|
(Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Surface appearance (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
MIL-PRF-85285, ISO 4628-1, ISO 4628-2, Visual, SAE-AMSC27725, FED-STD-141
|
|
Flattening (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
SAE-AMS4083, SAE-AMS4081, SAE-AMS4071, NR 216 DT
|
|
Bearing strength of composite laminates (T>23ºC) (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
I+D-E-325, AITM 1-0009, EN 6037
|
|
Bearing strength of composite laminates (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
I+D-E-325, AITM 1-0009, ASTM D5961/D5961M, EN 6037
|
|
Spraying properties (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
Visual, MIL-PRF-85285, FED-STD-141
|
|
Application of structural paints (Painted test panels) |
|
|
|
|
|
|
|
|
|
|
|
AIPI 05-02-009, AIPS 05-02-009
|
|
Application of structural paints () |
|
|
|
|
|
|
|
|
|
|
|
AIPI 05-02-009, AIPS 05-02-009
|
|
Application of external paint systems (Painted test panels) |
|
|
|
|
|
|
|
|
|
|
|
AIPI 05-02-003, AIPS 05-02-003
|
|
Application of external paint systems () |
|
|
|
|
|
|
|
|
|
|
|
AIPI 05-02-003, AIPS 05-02-003
|
|
(Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
ISO 2812-2, ISO 4628-1, ISO 4628-2, ASTM D714, BMS 10-79, BMS 10-86, BMS 10-11
|
|
Appearance and dustability (Corrosion) |
|
|
|
|
|
|
|
|
|
|
|
Visual, I+D-P-048, I+D-P-202, AIPI 02-05-001, MIL-DTL-5541
|
|
Pin-type bearing test of metallic materials (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
ISO 2813, ASTM D523, Visual
|
|
Vertical Slump (foaming structural adhesive films) prEN 2667-4 (Tests on film-type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flow Cups Calibration (dHTD) (Physico-chemical tests on liquid paints) |
|
|
|
|
|
|
|
|
|
|
|
ISO 2431, ASTM D4212, ASTM D1200
|
|
Yarn count (Physico-chemical tests) |
|
|
|
|
|
|
|
|
|
|
|
FED-TM-STD-191, UNE-EN 1049-2, AIMS 08-04-000
|
|
Corrosion prevention capability of non hardening jointing compounds under salt spray (Miscellany) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Shear testing (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
NASM 1312-20, ASTM B565, UNE 7246, T&L-PE-0010_CANCELADA, NASM 1312-13
|
|
Behaviour in high pressure and tempeerature curing cycle (Physico-chemical tests) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Compressive tube shear (non ambient temperature) (Tests on film-type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Compressive tube shear (Tests on film-type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
UNE-EN 2667-2, BATS 3391, A2TS 3391
|
|
Compression of composite laminates with hydraulic clamping (non ambient temperature) (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
AITM 1-0008, ISO 14126, ASTM D6641/D6641M , UNE-EN 6036
|
|
Compression of composite laminates with hydraulic clamping (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
AITM 1-0008, ISO 14126, UNE-EN 6036, ASTM D6641/D6641M , ASTM D3410/D3410 M
|
|
Compression of rigid plastics (T>23ºC) (Tests on liquid type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
ASTM D695, ISO 604, DIN 65064, ISO 3386-1/Amd 1
|
|
Compression of rigid plastics (T>23ºC) (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
ASTM D695, ISO 604, DIN 65064, ISO 3386-1/Amd 1
|
|
(Chemical analysis) |
|
|
|
|
|
|
|
|
|
|
|
AIPI 02-01-002, AITM 3-0035
|
|
Condition in container (Physico-chemical tests on liquid paints) |
|
|
|
|
|
|
|
|
|
|
|
BMS 10-60, BMS 10-103, ISO 1513, BMS 10-86, BMS 10-79, FED-STD-141, MIL-PRF-23377, MIL-PRF-85285, BSS 7373, Visual, MIL-PRF-85285
|
|
Electrical conductivity (Miscellany) |
|
|
|
|
|
|
|
|
|
|
|
ASTM E1004, UNE-EN 2004-1, AITM 6-6004, MIL-STD-1537
|
|
Consistency (Physico-chemical tests on liquid paints) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Amine content (Physico-chemical tests on liquid paints) |
|
|
|
|
|
|
|
|
|
|
|
BMS 10-103 OBS, BMS 10-11 OBS, BMS 10-79 Rev.M Par. 8.2.1, BMS 10-21, BSS 7433, D6-84113
|
|
Non volatile content (Tests on liquid type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
AITM 3-0025, MIL-A-46146, UNE-EN 827, BMS 5-89, ASTM D1644
|
|
Non volatile content (Tests on liquid type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
AITM 3-0025, MIL-A-46146, AS5127/1, DIN 65262-1
|
|
Non volatile content (Physico-chemical tests on liquid paints) |
|
|
|
|
|
|
|
|
|
|
|
ISO 3251, ASTM D2369, UNE-EN 827, BMS 5-89, BATS 4830
|
|
Solids content and corrosion inhibitor (Physico-chemical tests on liquid paints) |
|
|
|
|
|
|
|
|
|
|
|
I+D-E-159, EN 2757, BMS 5-89
|
|
Volatile content (foaming structural adhesive films) (Tests on liquid type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
UNE-EN 2667-3, BATS 4462, A2TS 4462
|
|
Surface Treatment Bath Control (pH - Conductivity) (Miscellany) |
|
|
|
|
|
|
|
|
|
|
|
I+D-P-033, AIMS 09-00-003, I+D-P-202, AIPI 02-05-001
|
|
Lifetime control of the painting kits (viscosity in flow cups) (Physico-chemical tests on liquid paints) |
|
|
|
|
|
|
|
|
|
|
|
ISO 2431, ASTM D1200, ASTM D4212, ISO 2431
|
|
Dimensional control (Microscopy) |
|
|
|
|
|
|
|
|
|
|
|
T-PE-0027, BATS 2505, A2TS 2505
|
|
Intergranular attack and end grain pitting (Corrosion) |
|
|
|
|
|
|
|
|
|
|
|
ASTM F2111, I+D-E-194, BATS 2545, BSS 7219, NE 41-013, BAC 5772, A2TS 2545
|
|
Total immersion corrosion test for aircraft chemicals (Corrosion) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Double lap shear composites (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
AITM 1-0019, BSS 7202, BMS 5-154
|
|
Double lap shear composites (Tests on film-type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
AITM 1-0019, BSS 7202, BMS 5-154
|
|
In-Plane Shear ±45º (non ambient temperature) (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
AITM 1-0002, ASTM D3518/D3518M, UNE-EN 6031
|
|
In-Plane Shear ±45º (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
AITM 1-0002, ASTM D3518/D3518M, ISO 14129, UNE-EN 6031
|
|
Interlaminar shear strength (non ambient temperature) (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
UNE-EN 2563, I+D-E-031, UNE-EN 2377, ASTM D2344/D2344M, I+D-E-286, ISO 14130, I+D-E-255, AITM 1-0047, A2TS 3464
|
|
Interlaminar shear strength (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
UNE-EN 2563, I+D-E-031, UNE-EN 2377, ASTM D2344/D2344M, I+D-E-286, ISO 14130, I+D-E-255, AITM 1-0047, BATS 3464, A2TS 3464
|
|
Single lap shear composites (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
AITM 1-0019, ISO 4587, ASTM D3165, UNE-EN 2243-1, BMS 5-129, ASTM D5868
|
|
Single lap shear composites (Tests on film-type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
AITM 1-0019, ISO 4587, ASTM D3165, UNE-EN 2243-1, BMS 5-129, ASTM D5868
|
|
Single lap shear metal-metal (non ambient temperature) (Tests on liquid type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
UNE-EN 2243-1, I+D-E-127, ASTM D1002, BSS 7202, AITM 1-0030, IGC 04.26.345, BSS 7272, BATS 3460, UNE-EN 1465, ISO 4587, BATS 3461, ASTM D3165, A2TS 3870, A2TS 3460
|
|
Single lap shear metal-metal (non ambient temperature) (Tests on film-type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
UNE-EN 2243-1, I+D-E-127, ASTM D1002, BSS 7202, AITM 1-0030, IGC 04.26.345, BSS 7272, BATS 3460, UNE-EN 1465, ISO 4587, BATS 3461, ASTM D3165, A2TS 3870, A2TS 3460
|
|
Single lap shear metal-metal (Tests on liquid type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
UNE-EN 2243-1, I+D-E-127, ASTM D1002, BSS 7202, AITM 1-0030, BATS 3460, IGC 04.26.345, ISO 4587, BSS 7272, RK-6619, UNE-EN 1465, BATS 3461, ISO 14273, A2TS 3460, ASTM D3165, A2TS 3870, DIN 65262-1, A2TS 3461, AS5127/1
|
|
Single lap shear metal-metal (Tests on film-type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
UNE-EN 2243-1, I+D-E-127, ASTM D1002, BSS 7202, AITM 1-0030, BATS 3460, IGC 04.26.345, ISO 4587, BSS 7272, RK-6619, UNE-EN 1465, BATS 3461, ISO 14273, A2TS 3460, ASTM D3165, A2TS 3870, DIN 65262-1, A2TS 3461, AS5127/1
|
|
Acid pickling (Electrochemical processes) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Acid pickling (Chemical processes) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Acid pickling (Chemical processes) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Acid pickling () |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(Physico-chemical tests) |
|
|
|
|
|
|
|
|
|
|
|
UNE-EN 542, ASTM D1622, UNE-EN ISO 1183-1, ISO 2781
|
|
Density (Physico-chemical tests) |
|
|
|
|
|
|
|
|
|
|
|
ISO 2781, UNE-EN ISO 1183-1, ASTM D792
|
|
Apparent density of solid samples (Tests on liquid type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
ASTM D1622, UNE-EN ISO 845, BMS 8-338, BAMS 532-002
|
|
Laminate Density (NTA62470 \ NTA62471) (Tests on film-type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
UNE-EN 2557, UNE-EN 2329, prEN 3003, ASTM D3776/D3776M, UNE-EN 2667-3, EFA-CFC-TP-021, BATS 4265, BATS 4565, BATS 4765, BATS 4561, HJPS-T014, I+D-E-123, I+D-E-124, BMS 5-154, I+D-E-242
|
|
Laminate Density (Tests on film-type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
UNE-EN 2557, UNE-EN 2329, prEN 3003, ASTM D3776/D3776M, UNE-EN 2667-3, EFA-CFC-TP-021, BATS 4265, BATS 4565, BATS 4765, BATS 4561, HJPS-T014, I+D-E-123, I+D-E-124, BMS 5-154, I+D-E-242
|
|
Density of liquid samples (Tests on liquid type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
ISO 2811-1, UNE-EN 542, BMS 8-301, ASTM D1875
|
|
Density of liquid samples (Miscellany) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Density of liquid samples (Physico-chemical tests on liquid paints) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Density of liquid samples (Tests on film-type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Density of solid or viscous samples (Tests on liquid type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Qualitative determination of non metallic materials for FTIR (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Qualitative determination of non metallic materials for FTIR (Tests on film-type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Alpha case determination in titanium alloys (Microscopy) |
|
|
|
|
|
|
|
|
|
|
|
BATS 2561, EN 2003-009, A2TS 2561
|
|
Determination of density (honeycomb core) (Physico-chemical tests) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Determination of non hardening characteristic of sealant (Miscellany) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Determination of apparent density (prism specimens) (Physico-chemical tests) |
|
|
|
|
|
|
|
|
|
|
|
UNE-EN ISO 845, BAMS 532-002, A2MS 532-002
|
|
Determination of the extent of cure by DSC (Thermal analysis) |
|
|
|
|
|
|
|
|
|
|
|
AITM 3-0008, ASTM E2602, ASTM E2160, ASTM D3417, ASTM D3418, UNE-EN 6064
|
|
Determination of the extent of cure by DSC (Tests on film-type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
AITM 3-0008, ASTM E2602, ASTM E2160, ASTM D3417, ASTM D3418, UNE-EN 6064
|
|
Determination of fiber mass and binder (Physico-chemical tests) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tack (Physico-chemical tests) |
|
|
|
|
|
|
|
|
|
|
|
EFA-CFC-TP-025, I+D-E-123, I+D-E-124, I+D-E-242, BATS 4766, BATS 4566, GMS 122026 , GMS-122025, MEP 15-008, MEP 15-008 Apdo. 6.2.4.7, SCD01644, SCD01508, SAE-AMS 6891
|
|
Determination of the glass transition temperature by MDSC (Thermal analysis) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Determination of the glass transition temperature by MDSC (Tests on film-type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Extrudability (Miscellany) |
|
|
|
|
|
|
|
|
|
|
|
AITM 7-0003, MIL-A-46146, T-PE-0087, BMS 5-28, BMS 3-38
|
|
Determination of the glass transition temperatures (DMA) (Thermal analysis) |
|
|
|
|
|
|
|
|
|
|
|
AITM 1-0003, ASTM D7028, BATS 4031, UNE-EN 6032, GPS-66203 , ASTM E1640, ASTM D5418, A2TS 4031
|
|
Determination of the glass transition temperatures (DMA) (Tests on film-type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
AITM 1-0003, ASTM D7028, BATS 4031, UNE-EN 6032, GPS-66203 , ASTM E1640, ASTM D5418, A2TS 4031
|
|
Determination of the resin content and fiber areal weight (Physico-chemical tests) |
|
|
|
|
|
|
|
|
|
|
|
UNE-EN 2559, UNE-EN 2331, EFA-CFC-TP-021, BATS 4765, BATS 4061, ISO 1172, BATS 4561, HJPS-T015-B, I+D-E-123, I+D-E-124, BATS 4761, BSS 7336, I+D-E-242
|
|
Determination of the resin and metal mesh mass (Physico-chemical tests) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Determination of extracting material (Physico-chemical tests) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Determination to areal weight (Physico-chemical tests) |
|
|
|
|
|
|
|
|
|
|
|
UNE-EN 2557, UNE-EN 2329, prEN 3003, ASTM D3776/D3776M, UNE-EN 2667-3, EFA-CFC-TP-021, BATS 4265, BATS 4565, BATS 4765, BATS 4561, HJPS-T014, I+D-E-123, I+D-E-124, BMS 5-154, I+D-E-242, A2TS 4461, BATS 4461, BMS 5-90, UNE-EN 12127, A2TS 4265, BMS 5-101, BMS 5-129
|
|
Determination to areal weight (Tests on film-type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
UNE-EN 2557, UNE-EN 2329, prEN 3003, ASTM D3776/D3776M, UNE-EN 2667-3, EFA-CFC-TP-021, BATS 4265, BATS 4565, BATS 4765, BATS 4561, HJPS-T014, I+D-E-123, I+D-E-124, BMS 5-154, I+D-E-242, A2TS 4461, BATS 4461, BMS 5-90, UNE-EN 12127, A2TS 4265, BMS 5-101, BMS 5-129
|
|
Determination of tg (DMA) (ISO 6721) (Thermal analysis) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Determination of tg (DMA) (ISO 6721) (Tests on film-type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Determination of Tg and extent of cure by MDSC (Thermal analysis) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Determination of Tg and extent of cure by MDSC (Tests on film-type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Torque determination by manual wrench (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
T&L-PE-0008, NASM 1312-31, ASTM D5649
|
|
Determination of delta ferrite content (Microscopy) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Determination of the fiber, resin and void contents. (Physico-chemical tests) |
|
|
|
|
|
|
|
|
|
|
|
UNE-EN 2564, ASTM D3171, ASTM D2734, BATS 4710, ABT 1-0018, I+D-E-124, MEP 15-008, ISO 1172, MEP 15-047, ASTM D2584, A2TS 4710, A2TS 4711
|
|
Examination and calculation of void content in FRP by microscopy (Microscopy) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(Physico-chemical tests) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Determination of the volatile content (Physico-chemical tests) |
|
|
|
|
|
|
|
|
|
|
|
UNE-EN 2558, UNE-EN 2330, EFA-CFC-TP-022, IGC 04.26.200, BATS 4762 , BATS 4262, BATS 4962, ASTM D3530, HJPS-T014, I+D-E-123, I+D-E-124, BSS 7337, BSS 7216, I+D-E-242, BMS 8-289
|
|
Determination of shrinkage (Miscellany) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flow (class C) (Miscellany) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Determination of the flow of adhesive films (Tests on film-type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Determination of the flow of adhesive films (IGC 04.26.325) (Tests on film-type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Determination of slump (Miscellany) |
|
|
|
|
|
|
|
|
|
|
|
AITM 2-0033, MIL-PRF-81733, BSS 7226, AS5127/1, MIL-A-46106, BAMS 532-002, A2MS 532-002
|
|
Determination of slump (Miscellany) |
|
|
|
|
|
|
|
|
|
|
|
AITM 2-0033, MIL-PRF-81733, AS5127/1, MIL-A-46106, BAMS 532-002
|
|
Determination the impregnation level of prepreg materials (Physico-chemical tests) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Anodic coating weight determination (Miscellany) |
|
|
|
|
|
|
|
|
|
|
|
ISO 2106, ASTM B137, BATS 5532, A2TS 5532
|
|
Determination of gel time (Fisher Johns) (Physico-chemical tests) |
|
|
|
|
|
|
|
|
|
|
|
AITM 3-0004, EN 6043, GPS-66205, BATS 4764, BATS 4264, BATS 4564, ASTM D3532/D3532M, BSS 7276, A2TS 4764, A2TS 4264
|
|
Tack free time (Miscellany) |
|
|
|
|
|
|
|
|
|
|
|
AITM 2-0034, DIN 65262-1, BSS 7278, MIL-A-46106, AS5127/1, SAE-AMS-S-4383, ASTM D2377, A-A-52408, TH 14.5165, BMS 5-95, MIL-A-46146
|
|
(Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
AITM 2-0027, UNE 48073-2, ISO 7724-2, Visual, ASTM D2244
|
|
Colour difference (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
ISO 7724-3, UNE 48073-3, ASTM D2244, UNE-EN ISO 11664-4, AITM 2-0027
|
|
AITM2-0027 (Airbus Master colors) (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Diffusion of core in clad (Microscopy) |
|
|
|
|
|
|
|
|
|
|
|
NE 40-002, I+D-P-220, BATS 2522, UNE-EN 2004-5, AIMS 03-04-000, T&L-PE-0003, AWPS006T, A2TS 2522
|
|
Hardness (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
ASTM E18, ISO 6508-1, ISO 6507-1, ASTM E10 (type A device), ISO 6506-1 (type A device), ASTM E92, ISO 9015-1, ISO 9015-2
|
|
Pencil hardness (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
BSS 7263, ASTM D3363, BAMS 565-008
|
|
Shore A hardness (Miscellany) |
|
|
|
|
|
|
|
|
|
|
|
ISO 7619-1, ASTM D2240, ISO 868, DIN 65262-1, ISO 48-4, AITM 1-0033, T-PE-0041, AS5127/1
|
|
Shore D hardness (Tests on liquid type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
ASTM D2240, UNE-EN ISO 868
|
|
Vickers hardness (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
ISO 6507-1, ISO 9015-1, ISO 9015-2
|
|
Sealing efficiency (Microscopy) |
|
|
|
|
|
|
|
|
|
|
|
ISO 2143, BATS 5076, A2TS 5076
|
|
(Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Slow deformation (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Non-structural adhesive bonding (Adhesive joints and surface preparation) |
|
|
|
|
|
|
|
|
|
|
|
AIPI 06-02-002, AIPS 06-02-002
|
|
Non-structural adhesive bonding () |
|
|
|
|
|
|
|
|
|
|
|
AIPI 06-02-002, AIPS 06-02-002
|
|
Non-structural adhesive bonding (Adhesive joints and surface preparation) |
|
|
|
|
|
|
|
|
|
|
|
AIPI 06-02-002, AIPS 06-02-002
|
|
Non-structural adhesive bonding (Adhesive joints and surface preparation) |
|
|
|
|
|
|
|
|
|
|
|
AIPI 06-02-002, AIPS 06-02-002
|
|
Structural bonding of thermoset and thermoplastic matrices compocite parts () |
|
|
|
|
|
|
|
|
|
|
|
AIPI 06-02-006, AIPS 06-02-006
|
|
Structural bonding of thermoset and thermoplastic matrices compocite parts (Adhesive joints and surface preparation) |
|
|
|
|
|
|
|
|
|
|
|
AIPI 06-02-006, AIPS 06-02-006
|
|
Structural bonding of thermoset and thermoplastic matrices compocite parts (Adhesive joints and surface preparation) |
|
|
|
|
|
|
|
|
|
|
|
AIPI 06-02-006, AIPS 06-02-006
|
|
Leak Test for Sandwich Structures (Physico-chemical tests) |
|
|
|
|
|
|
|
|
|
|
|
AITM 6-9003, I+D-E-336, AITM 2-0037
|
|
Notched bar impact testing of metallic materials (non ambient temperature) (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
ISO 148-1, ASTM E23, ASTM A370 Par. 20-29
|
|
Notched bar impact testing of metallic materials (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
ISO 148-1, ASTM E23, ASTM A370 Par. 20-29, BATS 3080
|
|
Flammability Testing (Physico-chemical tests) |
|
|
|
|
|
|
|
|
|
|
|
BATS 4050, FAR25.853, AITM 2-0002, BSS 7230
|
|
Bend test - flexibility (cylindrical mandrel) (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
ISO 1519, ASTM E290, ASTM D522/D522M, BAMS 565-007, IGC 04.26.500, AITM 1-0020, A2MS 565-007, A2MS 565-009, SAE-AMS 3095
|
|
Bend test - flexibility (conical mandrel) (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
ISO 6860, ASTM D522/D522M
|
|
Film thickness (foaming structural adhesive films) (Tests on film-type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cladding thickness (Microscopy) |
|
|
|
|
|
|
|
|
|
|
|
UNE-EN 2004-5, T&L-PE-0003, BATS 2463, A2TS 2463, SAE-AMS-QQ-A-250, SAE-AMS2355
|
|
Handleability check (Physico-chemical tests) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Knife cut defect evaluation (Microscopy) |
|
|
|
|
|
|
|
|
|
|
|
BATS 2543, BAC 5772, A2TS 2543
|
|
Passivation evaluation by water immersion (Corrosion) |
|
|
|
|
|
|
|
|
|
|
|
SAE-AMS 2700, ASTM A967/A967M, ISO 8075
|
|
Passivation evaluation by copper sulfate (Corrosion) |
|
|
|
|
|
|
|
|
|
|
|
SAE-AMS 2700, ASTM A380/A380M, ASTM A967/A967M, BATS 5073
|
|
Dimensional control of V-notched specimens for Charpy test (Miscellany) |
|
|
|
|
|
|
|
|
|
|
|
ISO 148-1, ASTM E23, NR 216 DT
|
|
Intermediate evaluation (Microscopy) |
|
|
|
|
|
|
|
|
|
|
|
UNE-EN 3665, BAPS 160-045, NE 40-308, AITM 5-0016, A2PS 160-045
|
|
Macroghaphic evaluation of resistance welding (Corrosion) |
|
|
|
|
|
|
|
|
|
|
|
I+D-P-182, AWS D17.2/D17.2M, ISO 17639
|
|
Macroscopic-Microscopic examination of welding joints (Microscopy) |
|
|
|
|
|
|
|
|
|
|
|
UNE 7-364-78 (UNE 7364), ISO 17639, ASME BPVC.IX, A2TS 2752
|
|
Exothermicity (foaming structural adhesive films) (Thermal analysis) |
|
|
|
|
|
|
|
|
|
|
|
prEN 2667-5, BATS 4464, A2TS 4464
|
|
Exposure to humid atmosphere of fiber reinforced plastics (Physico-chemical tests) |
|
|
|
|
|
|
|
|
|
|
|
UNE-EN 2823, EN 3615, ASTM D5229/D5229M, I+D-E-240
|
|
Exposure to light sources - fluorescent UV lamps (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
ISO 16474-1, ISO 16474-3, ASTM G154, ISO 4892-1, ISO 4892-3
|
|
Exposure to light sources - fluorescent UV lamps (Physico-chemical tests) |
|
|
|
|
|
|
|
|
|
|
|
ISO 16474-1, ISO 16474-3, ASTM G154, ISO 4892-1, ISO 4892-3
|
|
Manufacture of monolithic parts with thermoset prepreg materials () |
|
|
|
|
|
|
|
|
|
|
|
AIPI 03-02-019, AIPS 03-02-019
|
|
Manufacture of monolithic parts with thermoset prepreg materials (Autoclave cured panels) |
|
|
|
|
|
|
|
|
|
|
|
AIPI 03-02-019, AIPS 03-02-019
|
|
Manufacture of monolithic parts with thermoset prepreg materials (Autoclave cured panels) |
|
|
|
|
|
|
|
|
|
|
|
AIPI 03-02-019, AIPS 03-02-019
|
|
Manufacture of structural sandwich parts with thermosetting fibre reinforced skins () |
|
|
|
|
|
|
|
|
|
|
|
AIPI 03-02-018, AIPS 03-02-018
|
|
Manufacture of structural sandwich parts with thermosetting fibre reinforced skins (Autoclave cured panels) |
|
|
|
|
|
|
|
|
|
|
|
AIPI 03-02-018, AIPS 03-02-018
|
|
Manufacture of Reference standards for non-destructive inspection methods on fibre composites (Autoclave cured panels) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Manufacture of Reference standards for non-destructive inspection methods on fibre composites () |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Etch rate (Corrosion) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(Physico-chemical tests on liquid paints) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fineness of grind (Physico-chemical tests on liquid paints) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flexibility (Honeycomb Class I, Type III) (Physico-chemical tests) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Impact flexibility (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
MIL-PRF-85285, MIL-PRF-23377, TT-P-2760, ASTM D6905
|
|
Flexure of composite laminates (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
ASTM D790, A2TS 3440, ISO 6872, UNE-EN ISO 14125
|
|
Beam flexure of sandwich construction (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
ASTM C393/C393M , SAE-AMS-STD-401 Par. 5.2.4, prEN 6061, BATS 3470, A2TS 3470, ASTM D7249/D7249M
|
|
Resin flow (Physico-chemical tests) |
|
|
|
|
|
|
|
|
|
|
|
UNE-EN 2560, UNE-EN 2332, BATS 4763, BATS 4263, BATS 4563, ASTM D3531/D3531M, I+D-E-123, I+D-E-124, MEP 15-008, BSS 7335, I+D-E-242
|
|
Eutectic melting (Microscopy) |
|
|
|
|
|
|
|
|
|
|
|
I+D-P-220, BAC5602, NE 40-002, BATS 2521, T-PE-0002, AWPS006T, SAE-AMS2772, A2TS 2521, BPS-4139
|
|
Degree of curing (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
ASTM D5402, MIL-PRF-85285, TT-P-2760A, A2PS 138-055, BAPS 138-055
|
|
Staking retention test on bearings (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
NE 07-041 , NE 31-002 , AIPS 03-03-012
|
|
Specific Gravity (Physico-chemical tests) |
|
|
|
|
|
|
|
|
|
|
|
BMS 5-45, MIL-PRF-81733, BATS 4314, AS5127/1
|
|
Specific gravity, apparent, of liquid samples (Tests on liquid type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Expansion ratio (foaming structural adhesive films) (Tests on film-type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
UNE-EN 2667-3, BATS 4463, A2TS 4463, BMS 5-90
|
|
Water immersion of the test samples (Miscellany) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Water immersion of the test panels (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
ISO 2812-2, BAMS 565-002, BATS 4860, MIL-PRF-85285, TT-P-2760, BAMS 565-014, BSS 7225, BAMS 565-010, BMS 10-86, I+D-E-103, MIL-PRF-23377, BAMS 565-018, BAMS 565-008, NE 40-164, CMS-CT-201, MEP 10-059, NE 40-143, BMS 10-60, BAMS 552-003, NE 40-274, BAMS 565-016, NE 40-308, A2MS 565-001, A2MS 565-002, IGC 04.26.505, TN-A-007-10012, A2TS 4860, A2MS 565-009, A2MS 565-012, A2MS 565-018, A2MS 565-014, BAMS 565-001, BAMS565-001, MEP 10-070, A2MS 565-010, A2MS 565-016, FED-STD-141, NE 40-333
|
|
Fluid immersion of the test samples (Miscellany) |
|
|
|
|
|
|
|
|
|
|
|
BATS 6304, BMS 5-45, A2TS 6304, ISO 1817
|
|
Fluid immersion of the test panels (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
NE 40-164, BAMS 565-002, ISO 2812-1, BAMS 565-014, BAMS 565-010, BAMS 565-013, BAMS 565-018, BAMS 565-008, CMS-CT-201, SAE-AMS 3095, BMS 10-79, BAMS 565-007, BAMS 552-003, BAMS 565-016, BMS 10-60, A2MS 565-001, A2MS 565-002, A2MS 565-009, A2MS 565-012, A2MS 565-018, A2MS 565-014, BAMS 565-001, BAMS565-001, MEP 10-070, A2MS 565-010, A2MS 565-007, BMS 10-11, A2MS 565-016, MIL-PRF-85285
|
|
Metallographic examination (Microscopy) |
|
|
|
|
|
|
|
|
|
|
|
ASTM E3, ASTM E407, ASTM E340, BATS 6100, EN 3114-001, I+D-P-225, ASTM E381, A2TS 6100, ASTM A604/A604M
|
|
Metallographic examination (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
ASTM E3, ASTM E407, ASTM E340, BATS 6100, EN 3114-001, I+D-P-225, ASTM E381, A2TS 6100, ASTM A604/A604M
|
|
Metallographic examination (Microscopy) |
|
|
|
|
|
|
|
|
|
|
|
ASTM E3, ASTM E407, ASTM E340, BATS 6100, EN 3114-001, I+D-P-225, ASTM E381, A2TS 6100, ASTM A604/A604M
|
|
Ultrasonic Inspection () |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ultrasonic Inspection of impacted specimens (after mechanical test) () |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ultrasonic Inspection of impacted specimens () |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ultrasonic Inspection. Certification of reference standards. () |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Visual examination (Miscellany) |
|
|
|
|
|
|
|
|
|
|
|
T-PE-0110, BATS 2333, A2TS 2333
|
|
Visual inspection (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
Visual, I+D-P-111, BATS 2333
|
|
Visual inspection of surface treatments (Chemical analysis) |
|
|
|
|
|
|
|
|
|
|
|
I+D-P-111, I+D-P-416, AIPI 02-01-006, AIPS 02-01-006, AIPI 02-01-003, AIPS 02-01-003, AIPI 02-01-002, AIPS 02-01-002, I+D-P-040
|
|
Installation of parallel shank threaded fasteners () |
|
|
|
|
|
|
|
|
|
|
|
AIPI 01-02-022, AIPS 01-02-022
|
|
Installation of parallel shank threaded fasteners (Installation of fasteners) |
|
|
|
|
|
|
|
|
|
|
|
AIPI 01-02-022, AIPS 01-02-022
|
|
Installation of parallel shank threaded fasteners (Installation of fasteners) |
|
|
|
|
|
|
|
|
|
|
|
AIPI 01-02-022, AIPS 01-02-022
|
|
(Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Carrier areal weight (Tests on film-type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
UNE-EN 2559, UNE-EN 2331, AITM 3-0002, UNE-EN 6041
|
|
Machining of pull-out in fastener joints of composite
(Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
ABS0254, AITM 1-0066, prEN 6114
|
|
Machining of charpy in metallic material
(Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
ISO 148-1, ASTM E23, NR 216 DT, LR-0001
|
|
Machining of compressive tube shear in foaming adhesive
(Tests on film-type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Machining of compression in composite laminates
(Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
UNE-EN 2850, I+D-E-051, UNE-EN 2850, BSS 7260, AITM 1-0008
|
|
Machining of compression of laminates with hydraulic clamping (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
AITM 1-0008, ASTM D6641/D6641M , ISO 14126, ASTM D3410/D3410 M
|
|
Machining of fibre, resin and void contents in composite laminates
(Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
UNE-EN 2564, ASTM D2734, BATS 4710, ASTM D3171, BSS 7336
|
|
Machining of In-Plane Shear ±45º (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
AITM 1-0002, ASTM D3518/D3518M, ISO 14129, UNE-EN 6031
|
|
Machining of interlaminar shear in composite laminates (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
UNE-EN 2563, I+D-E-031, UNE-EN 2377, ASTM D2344/D2344M, I+D-E-286, ISO 14130, I+D-E-255, AITM 1-0047, A2TS 3464
|
|
Machining of single lap shear in metallic joints
(Tests on film-type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
UNE-EN 2243-1, I+D-E-127, ASTM D1002, BATS 3460, ISO 4587, RK-6619, IGC 04.26.345, A2TS 3460, A2LS 9401, BSS 7202, ASTM D3165, A2TS 3461
|
|
Machining of single lap shear in composite joints
(Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
AITM 1-0019, UNE-EN 2243-1, BMS 5-129
|
|
Machining of fibre reinforced plastic (FRP) components () |
|
|
|
|
|
|
|
|
|
|
|
AIPI 03-07-002, AIPS 03-07-002
|
|
Machining of fibre reinforced plastic (FRP) components (Machined) |
|
|
|
|
|
|
|
|
|
|
|
AIPI 03-07-002, AIPS 03-07-002
|
|
Machining of fibre reinforced plastic (FRP) components (Machined) |
|
|
|
|
|
|
|
|
|
|
|
AIPI 03-07-002, AIPS 03-07-002
|
|
Machining of DMA in composite laminates
(Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
AITM 1-0003, BATS 4031, UNE-EN 6032, ASTM D7028, ASTM E1640, ISO 6721-11, ASTM D5418, A2TS 4031
|
|
Machining of GIc in composite joints
(Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
I+D-E-290, AITM 1-0005, AITM 1-0053
|
|
(Miscellany) |
|
|
|
|
|
|
|
|
|
|
|
ISO 37, DIN 65262-1, DIN 53504, ASTM D412, AS5127/1
|
|
Machining of bell peel in metallic joints
(Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
I+D-E-128, UNE-EN 2243-2, ISO 4578, ASTM D3167, BSS 7206
|
|
Machining of drum peel in composite laminates
(Tests on film-type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
ASTM D1781, I+D-E-130, UNE-EN 2243-3, IGC 04.26.270 , I+D-E-256, A2TS 3480, BATS 3480, BSS 7206, I+D-E-289, SAE-AMS-STD-401
|
|
Machining of bend in metallic material
(Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
ASTM E290, BATS 2312, AWS B4.0, ISO 5173, ASTM E190, ASME BPVC.IX, LR-0001
|
|
Machining of open hole tension in composite laminates
(Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
I+D-E-326, ABS0258, AITM 1-0007, UNE-EN 6035, ASTM D3039/D3039M
|
|
Machining of tensile for round samples in metallic material
(Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
ASTM B557, ASTM B557M, ASTM E8/E8M, ISO 6892-1, BATS 3000, EN 2002-001, IGC 04.21.111, ASTM A370, ASME BPVC.IX
|
|
Machining of tensile for rectangular samples in metallic material
(Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
ASTM B557, ASTM B557M, ASTM E8/E8M, ISO 6892-1, BATS 3000, EN 2002-001, AWS B4.0, ASTM A370, IGC 04.21.111, ISO 4136, ASME BPVC.IX, A2LS 9302, LR-0001
|
|
Machining of metal rectangular samples for mechanical tensile test (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
ASTM B557, ASTM B557M, ASTM E8/E8M, ISO 6892-1, BATS 3000, EN 2002-001, AWS B4.0, ISO 4136, ASTM A370, NR 216 DT, ASME BPVC.IX, LR-0001
|
|
Machining of tensile for tubular samples in metallic material
(Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
ASTM B557, ASTM B557M, ASTM E8/E8M, ISO 6892-1, BATS 3000, EN 2002-001, ISO 4136, ASME BPVC.IX
|
|
Machining of tensile test of composite laminates (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
UNE-EN 2561, UNE-EN 2597, I+D-E-026, ASTM D3039/D3039M, AITM 1-0007, ASTM D638-Plastics, EN 2747, ISO 527-4, I+D-E-253, I+D-E-284, ISO 527-5, BSS 7320, EFA-CFC-TP-001, UNE-EN ISO 527-2, ISO 10618
|
|
Machining of flatwise tensile in composite laminates
(Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
I+D-E-246, AITM 1-0025, I+D-E-258, ASTM C297/C297M, prEN 6062, I+D-E-288, UNE-EN 2243-4, A2TS 3405, SAE-AMS-STD-401, BSS 7205
|
|
Machining of bearing in fastener joints of composite
(Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
I+D-E-325, UNE-EN 13706-2, AITM 1-0009, ASTM D5961/D5961M
|
|
Surface roughness measurement (Miscellany) |
|
|
|
|
|
|
|
|
|
|
|
AITM 1-0070, BATS 3211, A2TS 3211
|
|
Surface roughness measurement (Physico-chemical tests) |
|
|
|
|
|
|
|
|
|
|
|
AITM 1-0070, BATS 3211, A2TS 3211
|
|
Thickness measurement and variation (Physico-chemical tests) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Colour measurement (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
AITM 2-0027, ISO 7724-2, UNE 48073-2, ASTM D2244
|
|
Thickness measurement (Miscellany) |
|
|
|
|
|
|
|
|
|
|
|
I+D-N-400 Z-24.231/4, I+D-N-400 Z-24.232/4, UNE-ISO 4593, ASTM D6988
|
|
Thickness measurement of Composite Parts (Physico-chemical tests) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Laminate cured ply thickness (CPT) (Physico-chemical tests) |
|
|
|
|
|
|
|
|
|
|
|
UNE-ISO 4593, ASTM D6988, UNE-EN ISO 5084, EFA-CFC-TP-026, GPS-66201, I+D-E-243, HJPS-T015-B, UNE-EN 2565, SAE-AMS 6891, BMS 8-256, BMS8-212, NTA-62470, NTA-62471, MEP 15-047, BMS8-168, A2TS 4712, BATS 4712
|
|
Measurement of electrical resistance (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Measurement of the specular gloss (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
ISO 2813, ASTM D523, ASTM D2457
|
|
Thickness measurement of anodic layer by microscopical examination (Microscopy) |
|
|
|
|
|
|
|
|
|
|
|
ISO 1463, BATS 2550, A2TS 2550
|
|
Measurement of coating thickness (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
AITM 6-6006, ISO 2808, ISO 2360, BATS 4002, A2TS 4002, BSS 7413
|
|
Measurement of coating thickness (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Measurement of coating thickness by eddy current method (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
AITM 6-6006, ISO 2808, ISO 2360, BATS 4002, ASTM D7091, ASTM B244, A2TS 4002, ASTM B499, BSS 7413
|
|
Thickness measurement by microscopical examination of a transverse cross section (Microscopy) |
|
|
|
|
|
|
|
|
|
|
|
ISO 2808, ISO 1463, BATS 2463, A2TS 2463, UNE-EN 2781
|
|
Thickness measurement by microscopical examination of a transverse cross section (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
ISO 2808, ISO 1463, BATS 2463, A2TS 2463, UNE-EN 2781
|
|
Etch rate measurement - Acid pickling baths
(Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Etch rate measurement - alkaline pickling baths
(Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
AIPI 02-01-006, AIPS 02-01-006
|
|
Adhesives, resins mixing and samples preparation (Tests on liquid type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Microhardness HV1 (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
ASTM E384, ISO 6507-1, ISO 9015-2
|
|
Compression Modulus test of composite laminates( T>23ºC) (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
UNE-EN 2850, I+D-E-051, BSS 7260
|
|
Compression Modulus test of composite laminates (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
UNE-EN 2850, I+D-E-051, BSS 7260, SRM 1R-94
|
|
Compression Modulus test of rigid plastics (T>23ºC) (Tests on liquid type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
ASTM D695, ISO 604, DIN 65064
|
|
Compression Modulus test of rigid plastics (T>23ºC) (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
ASTM D695, ISO 604, DIN 65064
|
|
General assembly and installation of fasteners () |
|
|
|
|
|
|
|
|
|
|
|
AIPI 01-02-017, AIPS 01-02-017
|
|
General assembly and installation of fasteners (Installation of fasteners) |
|
|
|
|
|
|
|
|
|
|
|
AIPI 01-02-017, AIPS 01-02-017
|
|
General assembly and installation of fasteners (Installation of fasteners) |
|
|
|
|
|
|
|
|
|
|
|
AIPI 01-02-017, AIPS 01-02-017
|
|
Salt spray test - evaluation (Corrosion) |
|
|
|
|
|
|
|
|
|
|
|
ASTM B117, ISO 9227, BATS 5570, NASM 1312-1, A2TS 5570, Eurocae ED-14G, AITM 5-0009, ASTM D1654
|
|
Salt spray test - exposure (Corrosion) |
|
|
|
|
|
|
|
|
|
|
|
ASTM B117, ISO 9227, BATS 5570, NASM 1312-1, A2TS 5570, Eurocae ED-14G, AITM 5-0009
|
|
Pull-off test for adhesion (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Morphology B observation of FRP laminates by optical microscopy (Microscopy) |
|
|
|
|
|
|
|
|
|
|
|
AITM 4-0005, T-PE-0085, ASTM E3, M21E/IMA
|
|
Strippability (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Restoration (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Washability (cleaning efficiency) (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Artificial weathering. Measurement of the specular gloss (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heat Stability. Bend test - flexibility (cylindrical mandrel) (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dry coating weight (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cross-cut adhesion test (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
ISO 2409, ASTM D3359, BATS 4860
|
|
Measurement of coating thickness by eddy current method (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
AITM 6-6006, ISO 2808, ISO 2360, BATS 4002, ASTM D7091
|
|
Reticulation (solvent resistance) (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
I+D-E-299, ASTM D5402, AITM 1-0024
|
|
Hydrogen porosity (Microscopy) |
|
|
|
|
|
|
|
|
|
|
|
BATS 2520, BAC5602, NE 40-002, I+D-P-220, T&L-PE-0001, AWPS006T, SAE-AMS2772, A2TS 2520, BPS-4139
|
|
Torque tightening of screws, bolts and nuts () |
|
|
|
|
|
|
|
|
|
|
|
AIPI 01-02-008, AIPS 01-02-008
|
|
Torque tightening of screws, bolts and nuts (Installation of fasteners) |
|
|
|
|
|
|
|
|
|
|
|
AIPI 01-02-008, AIPS 01-02-008
|
|
Torque tightening of screws, bolts and nuts (Installation of fasteners) |
|
|
|
|
|
|
|
|
|
|
|
AIPI 01-02-008, AIPS 01-02-008
|
|
(Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Floating Roller Peel (non ambient temperature) (Tests on film-type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
I+D-E-128, UNE-EN 2243-2, AITM 5-0009
|
|
Floating Roller Peel (non ambient temperature) (Tests on liquid type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
I+D-E-128, UNE-EN 2243-2, AITM 5-0009
|
|
Floating Roller Peel (Tests on film-type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
I+D-E-128, UNE-EN 2243-2, ISO 4578, UNE-EN 1464 , AITM 5-0009, EN 1967, BSS 7206, ASTM D3167
|
|
Floating Roller Peel (Tests on liquid type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
I+D-E-128, UNE-EN 2243-2, ISO 4578, UNE-EN 1464 , AITM 5-0009, EN 1967, BSS 7206, ASTM D3167
|
|
Bead peel test (Miscellany) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Climbing Drum Peel (non ambient temperature) (Tests on film-type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
ASTM D1781, I+D-E-130, UNE-EN 2243-3, IGC 04.26.270
|
|
Climbing Drum Peel (non ambient temperature) (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
ASTM D1781, I+D-E-130, UNE-EN 2243-3, IGC 04.26.270
|
|
Climbing Drum Peel (Tests on film-type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
ASTM D1781, I+D-E-130, UNE-EN 2243-3, IGC 04.26.270 , I+D-E-256, BSS 7206, SAE-AMS-STD-401, A2TS 3480, BATS 3480, I+D-E-289
|
|
Climbing Drum Peel (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
ASTM D1781, I+D-E-130, UNE-EN 2243-3, IGC 04.26.270 , I+D-E-256, BSS 7206, SAE-AMS-STD-401, A2TS 3480, BATS 3480, I+D-E-289
|
|
Thickness loss (Corrosion) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Weight loss of plasticizers on heating (Tests on film-type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Drape (Physico-chemical tests) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bend testing of metallic material (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
ASTM E290, BATS 2312, ISO 5173, ASTM E190, DIN EN 2002-6 , ASME BPVC.IX, I+D-P-317, AIPS 02-03-008, ISO 7438
|
|
Bend testing of a paint system (non ambient temperature) (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Compressive tube shear preparation (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pressure on liquid shim adhesive (Tests on film-type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
BAMS 554-004, A2MS 554-004
|
|
Cross-cut adhesion test-copia (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
ISO 2409, ASTM D3359, BATS 4860, AIPI 05-05-009, FED-STD-141
|
|
Fillet radius and transition zone (Microscopy) |
|
|
|
|
|
|
|
|
|
|
|
I+D-P-152, PPS 42.01, BAC 5772, AIPS 09-03-001
|
|
Chromate conversion coating (Electrochemical processes) |
|
|
|
|
|
|
|
|
|
|
|
AIPI 02-05-001, AIPS 02-05-001, I+D-P-202, BAC5719
|
|
Chromate conversion coating (Chemical processes) |
|
|
|
|
|
|
|
|
|
|
|
AIPI 02-05-001, AIPS 02-05-001, I+D-P-202, BAC5719
|
|
Chromate conversion coating (Chemical processes) |
|
|
|
|
|
|
|
|
|
|
|
AIPI 02-05-001, AIPS 02-05-001, I+D-P-202, BAC5719
|
|
Chromate conversion coating () |
|
|
|
|
|
|
|
|
|
|
|
AIPI 02-05-001, AIPS 02-05-001, I+D-P-202, BAC5719
|
|
Compression stress test of composite laminates (T>23ºC) (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
UNE-EN 2850, I+D-E-051, BSS 7260
|
|
Compression stress test of composite laminates (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
UNE-EN 2850, I+D-E-051, BSS 7260, SRM 1R-94
|
|
Flatwise compressive stress of sandwich cores(T>23ºC) (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Compression stress test of rigid plastics (T>23ºC) (Tests on liquid type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
ASTM D695, ISO 604, DIN 65064
|
|
Compression stress test of rigid plastics (T>23ºC) (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
ASTM D695, ISO 604, DIN 65064
|
|
Shear stress of sandwich cores (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fluid resistance - adherence (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
BATS 4860, ISO 2409, ISO 2812-1, BAMS 565-013, ASTM D2510, ASTM D3359, BAMS 552-003, A2TS 4860, A2MS 565-014
|
|
Fluid resistance - adhesion of coatings by scrape adhesion (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fluid resistance - aspect (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
NE 40-164, BAMS 565-002, ISO 4628-2, ISO 2812-1, BAMS 565-014, BAMS 565-010, BMS 10-86, BAMS 565-013, BAMS 565-018, BAMS 565-008, SAE-AMS 3095, BAMS 565-007, BAMS 565-016, A2MS 565-001, A2MS 565-002, ASTM D714, A2MS 565-009, A2MS 565-012, A2MS 565-018, A2MS 565-014, BAMS 565-001, BAMS565-001, Visual, MEP 10-070, ISO 4628-1, ISO 4628-4, ISO 4628-5, ISO 4628-6
|
|
Fluid resistance - pencil hardness (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
NE 40-164, BAMS 565-002, BAMS 565-014, BSS 7263, BAMS 565-013, BAMS 565-018, BAMS 565-008, CMS-CT-201, ASTM D3363, A2MS 565-001, A2MS 565-009, A2MS 565-014, MEP 10-070, BAMS 565-001
|
|
Fluid resistance - scratch (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Compression strength after impact (T>23ºC) (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
AITM 1-0010, AITM 1-0077, UNE-EN 6038
|
|
Filiform corrosion resistance (Corrosion) |
|
|
|
|
|
|
|
|
|
|
|
UNE-EN 3665, NE 40-308, A2PS 160-045, AITM 5-0016
|
|
(Tests on film-type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(Tests on film-type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(Tests on film-type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
UNE-EN 2243-1, ASTM D1002
|
|
(Tests on film-type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Resistance to water - adherence (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
ISO 2812-2, ISO 2409, BATS 4860, BAMS 565-002, BAMS 565-008, NE 40-164, SAE-AMS 3095, ASTM D3359, AIPI 05-05-009, BAMS 552-003, IGC 04.26.490, TN-A-007-10012, A2TS 4860, A2MS 565-014, MEP 10-070
|
|
Resistance to water - adhesion of coatings by scrape adhesion (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Resistance to water - aspect (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
ISO 2812-2, ISO 4628-1, ISO 4628-2, BAMS 565-002, BAMS 565-014, BAMS 565-010, BAMS 565-018, NE 40-164, ASTM D714, A2MS 565-001, A2MS 565-002, IGC 04.26.505, TN-A-007-10012, A2MS 565-012, A2MS 565-018, A2MS 565-014, BAMS 565-001, BAMS565-001, Visual, ISO 4628-4, ISO 4628-6, ISO 4628-5
|
|
Resistance to water - scratch (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
ISO 2812-2, ISO 1518-1, IGC 04.26.505, IGC 04.26.495, TN-A-007-10012
|
|
Water resistance of coatings using controlled condensation (Corrosion) |
|
|
|
|
|
|
|
|
|
|
|
ASTM D4585 / D4585M, AITM 2-0068
|
|
Impact resistance (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
ASTM D2794, BATS 4866, BAMS 565-002, MEP 10-069, NE 40-308, ISO 6272-1, BAMS 565-014, A2MS 565-014
|
|
Pin-bearing strength (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Peel strength at 180° (Miscellany) |
|
|
|
|
|
|
|
|
|
|
|
AITM 2-0013, BATS 3488, BSS 7257, AS5127/1, SAE-AMS3265, DIN 65262-1, A2TS 3488, AITM 7-0006
|
|
Peel strength at 180° of adhesive bonds (Tests on film-type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
UNE-EN ISO 8510-2, ASTM D903
|
|
Peel strength at 180° of adhesive bonds (Tests on liquid type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
UNE-EN ISO 8510-2, ASTM D903
|
|
Electric resistance (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Reticulation (solvent resistance) (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
I+D-E-299, ASTM D5402, TT-P-2760, AITM 1-0024, NE 40-274, SAE-AMSC27725, NE 40-143
|
|
(Miscellany) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Susceptibility to intergranular corrosion (Microscopy) |
|
|
|
|
|
|
|
|
|
|
|
NE 40-002, ASTM G110, T&L-PE-0022, BATS 2525, DIN-EN-2716, SAE-AMS2772, QVA-Z10-59-03, IGC 04.24.103, AWPS006T, AIMS 03-04-000, A2TS 2525, BPS-4139
|
|
Preparation of holes in fibre reinforced plastic (FRP) and hybrid materials () |
|
|
|
|
|
|
|
|
|
|
|
AIPI 01-02-005, AIPS 01-02-005
|
|
Preparation of holes in fibre reinforced plastic (FRP) and hybrid materials (Machined) |
|
|
|
|
|
|
|
|
|
|
|
AIPI 01-02-005, AIPS 01-02-005
|
|
Preparation of holes in fibre reinforced plastic (FRP) and hybrid materials (Machined) |
|
|
|
|
|
|
|
|
|
|
|
AIPI 01-02-005, AIPS 01-02-005
|
|
Grain size (Microscopy) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Interlaminar fracture toughness GIc (Tests on film-type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
AITM 1-0053, AITM 1-0005, I+D-E-290, UNE-EN 6033
|
|
Interlaminar fracture toughness GIc (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
AITM 1-0053, AITM 1-0005, I+D-E-290, UNE-EN 6033
|
|
(Miscellany) |
|
|
|
|
|
|
|
|
|
|
|
BAMS 554-004, A2MS 554-004
|
|
(Miscellany) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Application time (extrusion) (Miscellany) |
|
|
|
|
|
|
|
|
|
|
|
AITM 7-0003, MIL-PRF-81733, AS5127/1, MIL-A-46146, DIN 65262-1, TH 14.5165
|
|
Application time (viscosity) (Miscellany) |
|
|
|
|
|
|
|
|
|
|
|
AITM 7-0003, DIN 65262-1, AS5127/1, BMS 5-45, ASTM D2556, ISO 2555, TH 14.5165
|
|
Application time (Miscellany) |
|
|
|
|
|
|
|
|
|
|
|
BMS 8-338, CMS-554-01 , BAMS 554-001, A2MS 554-001
|
|
Cure time (Tests on liquid type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
AITM 1-0033, ASTM D2240, ISO 7619-1, DIN 65262-1, AS5127/1, ISO 868, TH 14.5165, BMS 5-63 , BMS 5-45, BMS 5-95
|
|
Cure time (Miscellany) |
|
|
|
|
|
|
|
|
|
|
|
AITM 1-0033, ASTM D2240, ISO 7619-1, DIN 65262-1, AS5127/1, ISO 868, TH 14.5165, BMS 5-63 , BMS 5-45, BMS 5-95
|
|
Assembly time (class C) (Miscellany) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Gel time (Room Temperature) (Physico-chemical tests) |
|
|
|
|
|
|
|
|
|
|
|
BMS 8-301, BMS 5-28, MS050007E
|
|
Drying time (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
ISO 9117-3, FED-STD-141, ASTM D1640/D1640M, ISO 9117-6, ISO 9117-1, BATS 4817, BATS 4843, SAE-AMSC27725, IGC 04.26.480, A2TS 4843, SAE-AMS 3095, ASTM D5895
|
|
(Miscellany) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(Physico-chemical tests on liquid paints) |
|
|
|
|
|
|
|
|
|
|
|
ISO 2431, ASTM D1200, ASTM D4212, ASTM D2471
|
|
Pot life (Tests on liquid type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
ISO 2431, ASTM D1200, ASTM D4212, Pintado, UNE-EN ISO 9514, Visual, BSS 7234, ISO 2431, MEP 10-069, FED-STD-141
|
|
Pot life (Tests on cured paintings) |
|
|
|
|
|
|
|
|
|
|
|
ISO 2431, ASTM D1200, ASTM D4212, Pintado, UNE-EN ISO 9514, Visual, BSS 7234, ISO 2431, MEP 10-069, FED-STD-141
|
|
Pot life of mixed components (Physico-chemical tests) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Verification of Testing Frame and Specimen Alignment (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Verification of Testing Frame and Specimen Alignment (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tension through the hole (T>23ºC) (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tensile test of composite laminates (non ambient temperature) (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
UNE-EN 2561, I+D-E-026, UNE-EN 2597, AITM 1-0007, I+D-E-253, ASTM D3039/D3039M, SRM 4R-94
|
|
Tensile test of composite laminates (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
UNE-EN 2561, I+D-E-026, UNE-EN 2597, ASTM D3039/D3039M, AITM 1-0007, EN 2747, ISO 10618, ISO 527-4, I+D-E-253, EFA-CFC-TP-001, I+D-E-284, ISO 527-5, ASTM D638-Composite, BSS 7320, SRM 4R-94, UNE-EN 6035
|
|
Tension by-pass (non ambient temperature) (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tension by-pass (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
I+D-E-326, AITM 1-0007, UNE-EN 6035, IGC 04.26.260
|
|
Pull out strength of mechanical joints (T>23ºC) (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tensile strength of butt joints (Tests on film-type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
UNE-EN 15870, ASTM C633, ASTM D2095
|
|
Tensile strength of butt joints (Tests on liquid type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
UNE-EN 15870, ASTM C633, ASTM D2095
|
|
Flatwise tensile (non ambient temperature) (Tests on film-type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
AITM 1-0025, I+D-E-258, I+D-E-246, UNE-EN 2243-4, prEN 6062, I+D-E-288, ASTM C297/C297M, BSS 7205, SAE-AMS-STD-401
|
|
Flatwise tensile (non ambient temperature) (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
AITM 1-0025, I+D-E-258, I+D-E-246, UNE-EN 2243-4, prEN 6062, I+D-E-288, ASTM C297/C297M, BSS 7205, SAE-AMS-STD-401
|
|
Flatwise tensile (Tests on film-type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
AITM 1-0025, I+D-E-258, I+D-E-246, UNE-EN 2243-4, prEN 6062, I+D-E-288, ASTM C297/C297M, BSS 7205, A2TS 3405, SAE-AMS-STD-401
|
|
Flatwise tensile (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
AITM 1-0025, I+D-E-258, I+D-E-246, UNE-EN 2243-4, prEN 6062, I+D-E-288, ASTM C297/C297M, BSS 7205, A2TS 3405, SAE-AMS-STD-401
|
|
Tension testing of metal round specimen (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
ASTM B557, ASTM B557M, ASTM E8/E8M, ISO 6892-1, BATS 3000, BATS 3001, BATS 3002, ASTM F606/F606M, EN 2002-001, ASTM A370, IGC 04.21.111, A2TS 3000, A2TS 3001, A2TS 3002
|
|
Tension testing of metal rectangular specimen (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
ASTM B557, ASTM B557M, ASTM E8/E8M, ISO 6892-1, BATS 3000, BATS 3001, BATS 3002, EN 2002-001, ASTM A370, IGC 04.21.111, A2TS 3000, A2TS 3001, A2TS 3002
|
|
Tension testing of metal rectangular specimen with curvature (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
ASTM B557, ASTM B557M, ASTM E8/E8M, ISO 6892-1, BATS 3000, BATS 3001, BATS 3002, EN 2002-001, ASTM A370, ISO 4136
|
|
Tension testing of plastic rectangular specimen (non ambient temperature) (Miscellany) |
|
|
|
|
|
|
|
|
|
|
|
ASTM D638-Plastics, ASTM D882, UNE-EN ISO 527-2, ISO 37, ISO 527-3, ASTM D412, DIN 53504
|
|
Tension testing of plastic rectangular specimen (non ambient temperature) (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
ASTM D638-Plastics, ASTM D882, UNE-EN ISO 527-2, ISO 37, ISO 527-3, ASTM D412, DIN 53504
|
|
Tension testing of plastic rectangular specimen (Miscellany) |
|
|
|
|
|
|
|
|
|
|
|
ASTM D638-Plastics, ASTM D882, ISO 527-3, UNE-EN ISO 527-2, ASTM D412, ISO 37, DIN 53504
|
|
Tension testing of plastic rectangular specimen (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
ASTM D638-Plastics, ASTM D882, ISO 527-3, UNE-EN ISO 527-2, ASTM D412, ISO 37, DIN 53504
|
|
Tension testing of metal tubular specimen (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
ASTM B557, ASTM B557M, ASTM E8/E8M, ISO 6892-1, BATS 3000, BATS 3001, BATS 3002, ASTM F606/F606M, EN 2002-001, ASTM A370
|
|
Tension testing on welds of metal rectangular specimen (Mechanical analysis) |
|
|
|
|
|
|
|
|
|
|
|
ASTM E8/E8M, ISO 6892-1, ISO 4136, ASTM A370, ASME BPVC.IX
|
|
(Physico-chemical tests on liquid paints) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(Miscellany) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(Physico-chemical tests on liquid paints) |
|
|
|
|
|
|
|
|
|
|
|
ISO 2431, ASTM D1200, ASTM D4212, ISO 12058-1
|
|
(Physico-chemical tests on liquid paints) |
|
|
|
|
|
|
|
|
|
|
|
ISO 2431, ASTM D1200, ASTM D4212, BSS 7234, ISO 2431
|
|
(Physico-chemical tests on liquid paints) |
|
|
|
|
|
|
|
|
|
|
|
ISO 2431, ASTM D1200, ASTM D4212, ISO 2431, ISO 12058-1
|
|
(Physico-chemical tests on liquid paints) |
|
|
|
|
|
|
|
|
|
|
|
ISO 2431, ASTM D1200, ASTM D4212
|
|
Viscosity. Determination of time by use of flow cups (Physico-chemical tests on liquid paints) |
|
|
|
|
|
|
|
|
|
|
|
ISO 2431, ASTM D1200, ASTM D4212, ISO 2431, BSS 7234, ASTM D1084, ASTM D3794, MEP 10-069
|
|
Viscosity. Determination using a falling-ball viscometer (Physico-chemical tests) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Viscosity. Determination using a single cylinder type rotational viscometer method (Tests on liquid type adhesives) |
|
|
|
|
|
|
|
|
|
|
|
ISO 2555, ASTM D2393, ASTM D2196, BATS 4385, BAMS 552-003
|
|
Viscosity. Determination using a single cylinder type rotational viscometer method (Miscellany) |
|
|
|
|
|
|
|
|
|
|
|
ISO 2555, ASTM D2393, ASTM D2196, BATS 4385, BAMS 552-003
|
|
Viscosity. Determination using a single cylinder type rotational viscometer method (Miscellany) |
|
|
|
|
|
|
|
|
|
|
|
ISO 2555, AS5127/1, ASTM D2196, BMS 5-95, BATS 4385, MIL-PRF-81733, DIN 65262-1, ASTM D2556
|
|
Fiber Volume (Laminate) (Physico-chemical tests) |
|
|
|
|
|
|
|
|
|
|
|
BATS 4710, NTA-62470, SRM 10R-94, MEP 15-047, NTA-62471, I+D-E-123, ASTM D3171, A2TS 4710
|
|
Wedge crack extension test (Chemical analysis) |
|
|
|
|
|
|
|
|
|
|
|
ASTM D3762, I+D-E-301, BSS 7448, BAC5555
|
