These are the tests that we have implemented within the category that you have selected

Click to access the type of approval you are interested in

TEST
AIRBUS
ADS
A220
BOEING
BOMBARDIER
EMBRAER
ENAC
NADCAP
SIKORSKY
SPECS.
Water absorption test
ISO 6916-2
Airbus DS
Nadcap
Sample conditioning
UNE-EN 2823, EN 3615, ASTM D5229/D5229M, I+D-E-240, ISO 291, ASTM D5418, ISO 6270-2
ASTM D2197
Nadcap
ASTM D2197
Nadcap
Adhesion of coatings by scrape adhesion
ASTM D2197
Nadcap
Wet adhesion
ISO 2812-2, FED-STD-141, MIL-PRF-85285, MIL-PRF-23377, ASTM D3359, NE 40-143, I+D-E-103, BATS 4860, BSS 7225, CMS-CT-201, MEP 10-059, NE 40-308, MEP 10-069, NE 40-274, A2TS 4860, NE 40-333
Dry adhesion
ASTM D3359, BATS 4860, I+D-E-103, NE 40-143, MEP 10-069, BSS 7225, NE 40-164, NE 40-160, MEP 10-070, MEP 10-117, CMS-CT-201, NE 40-308, ISO 2409, AITM 2-0040, MEP 10-059, QCI 29-32, NE 40-274, BAMS 552-003, A2TS 4860, NE 40-333
Analysis of non metallic materials by DSC
AITM 3-0002, AITM 3-0027, EFA-CFC-TP-017, ASTM D3418, AITM 3-0008, ISO 11357-3, I+D-E-125, I+D-E-241, IGC 04.26.137, ASTM D3417, UNE-EN 6041, GPS-66204, ISO 11357-2, MEP 09-063., ASTM E1356
Analysis of non metallic materials by DSC
AITM 3-0002, AITM 3-0027, EFA-CFC-TP-017, ASTM D3418, AITM 3-0008, ISO 11357-3, I+D-E-125, I+D-E-241, IGC 04.26.137, ASTM D3417, UNE-EN 6041, GPS-66204, ISO 11357-2, MEP 09-063., ASTM E1356
Analysis of resin by FTIR
AITM 3-0003, ASTM E1252, I+D-E-241, IGC 04.26.130, ASTM E168, prEN 6042, I+D-E-125, EFA-CFC-TP-020, NTA-62470, GPS-66207
Analysis of resin by FTIR
AITM 3-0003, ASTM E1252, I+D-E-241, IGC 04.26.130, ASTM E168, prEN 6042, I+D-E-125, EFA-CFC-TP-020, NTA-62470, GPS-66207
Phosphoric acid anodising (PAA)
I+D-P-111
Airbus DS
Nadcap
Phosphoric acid anodising (PAA)
I+D-P-111
Airbus DS
Nadcap
Phosphoric acid anodising (PAA)
I+D-P-111
Airbus DS
Nadcap
Phosphoric sulphuric acid anodising (PSA)
AIPI 02-01-006, AIPS 02-01-006
Airbus DS
Nadcap
Phosphoric sulphuric acid anodising (PSA)
AIPI 02-01-006, AIPS 02-01-006
Airbus DS
Nadcap
Phosphoric sulphuric acid anodising (PSA)
AIPI 02-01-006, AIPS 02-01-006
Airbus DS
Nadcap
Sulphuric acid anodising (SAA)
AIPI 02-01-002, AIPS 02-01-002, SAE-AMS-2471
Airbus DS
Nadcap
Sulphuric acid anodising (SAA)
AIPI 02-01-002, AIPS 02-01-002, SAE-AMS-2471
Airbus DS
Nadcap
Sulphuric acid anodising (SAA)
AIPI 02-01-002, AIPS 02-01-002, SAE-AMS-2471
Airbus DS
Nadcap
Tartaric sulphuric acid anodising (TSA)
AIPI 02-01-003, AIPS 02-01-003, I+D-P-416
Airbus DS
Nadcap
Tartaric sulphuric acid anodising (TSA)
AIPI 02-01-003, AIPS 02-01-003, I+D-P-416
Airbus DS
Nadcap
Tartaric sulphuric acid anodising (TSA)
AIPI 02-01-003, AIPS 02-01-003, I+D-P-416
Airbus DS
Nadcap
Appearance of the individual components
Visual, FED-STD-141
Airbus DS
Nadcap
Appearance of the individual components
Visual, FED-STD-141
Airbus DS
Nadcap
Visual, ISO 4628-1
Surface appearance
MIL-PRF-85285, ISO 4628-1, ISO 4628-2, Visual, FED-STD-141, SAE-AMSC27725
Flattening
SAE-AMS4083, SAE-AMS4081, SAE-AMS4071, NR 216 DT
Nadcap
Bearing strength of composite laminates (T>23ºC)
I+D-E-325, AITM 1-0009, EN 6037
Nadcap
Bearing strength of composite laminates
I+D-E-325, AITM 1-0009, ASTM D5961/D5961M, EN 6037
Nadcap
Application of corrosion prevention primers for bonding
I+D-P-157
Airbus DS
Nadcap
Application of corrosion prevention primers for bonding
I+D-P-157
Airbus DS
Nadcap
Spraying properties
Visual, MIL-PRF-85285, FED-STD-141
Application and finish
FED-STD-141
ISO 2812-2, ISO 4628-1, ISO 4628-2, ASTM D714, BMS 10-11, BMS 10-79, BMS 10-86
ASTM D714, BMS 10-79, BMS 10-86, BMS 10-11
Appearance and dustability
Visual, I+D-P-048, I+D-P-202, AIPI 02-05-001, MIL-DTL-5541
Nadcap
ISO 2813, ASTM D523, Visual
Flow Cups Calibration (dHTD)
ISO 2431, ASTM D4212, ASTM D1200
Nadcap
Quality of the individual components
ISO 1513, SAE-AMS 3095
Yarn count
FED-TM-STD-191, UNE-EN 1049-2, AIMS 08-04-000
Nadcap
Corrosion prevention capability of non hardening jointing compounds under salt spray
AITM 5-0012
Nadcap
Shear testing
NASM 1312-20, ASTM B565, UNE 7246, T&L-PE-0010_CANCELADA, NASM 1312-13
Nadcap
Colour of the painted panel
Visual, BAMS 565-008, BAMS 565-016
Airbus DS
Nadcap
Behaviour in high pressure and tempeerature curing cycle
I+D-N-400 Z-24.211/2
Airbus DS
Nadcap
Compressive tube shear
UNE-EN 2667-2, BATS 3391, A2TS 3391, NASM 25027
Compression of composite laminates with hydraulic clamping (non ambient temperature)
AITM 1-0008, ISO 14126, ASTM D6641/D6641M , UNE-EN 6036
Compression of composite laminates with hydraulic clamping
AITM 1-0008, ISO 14126, UNE-EN 6036, ASTM D6641/D6641M , ASTM D3410/D3410 M
Compression of rigid plastics (T>23ºC)
ASTM D695, ISO 604, DIN 65064, ISO 3386-1/Amd 1
Compression of rigid plastics (T>23ºC)
ASTM D695, ISO 604, DIN 65064, ISO 3386-1/Amd 1
Compression of rigid plastics
ASTM D695, ISO 604, DIN 65064, ISO 3386-1/Amd 1
Compression of rigid plastics
ASTM D695, ISO 604, DIN 65064, ISO 3386-1/Amd 1
I+D-P-111
Airbus DS
Nadcap
AIPI 02-01-002, AITM 3-0035
Condition in container (IRR)
ISO 1513
Nadcap
Condition in container
BMS 10-60, BMS 10-103, ISO 1513, BMS 10-86, BMS 10-79, FED-STD-141, MIL-PRF-23377, MIL-PRF-85285, BSS 7373
Electrical conductivity
ASTM E1004, UNE-EN 2004-1, AITM 6-6004, MIL-STD-1537
Consistency
TN-A-007-10012
Airbus DS
Nadcap
Amine content
BMS 10-103 OBS, BMS 10-11 OBS, BMS 10-79 Rev.M Par. 8.2.1, BMS 10-21, BSS 7433, D6-84113
Airbus DS
Nadcap
Volatile organic compound (VOC) content
ASTM D3960, ISO 11890-1
Nadcap
Non volatile content
AITM 3-0025, MIL-A-46146, UNE-EN 827, BMS 5-89, ASTM D1644
Non volatile content
AITM 3-0025, MIL-A-46146, AS5127/1, DIN 65262-1
Non volatile content
ISO 3251, ASTM D2369, UNE-EN 827, BMS 5-89, BATS 4830
ASTM D1353
Nadcap
Solids content and corrosion inhibitor
I+D-E-159, EN 2757, BMS 5-89
Nadcap
Volatile content
AIMS 10-03-000, DIN 65064
Nadcap
Surface Treatment Bath Control (pH - Conductivity)
I+D-P-033, AIMS 09-00-003, I+D-P-202, AIPI 02-05-001
Nadcap
Lifetime control of the painting kits (viscosity in flow cups)
ISO 2431, ASTM D1200, ASTM D4212, UNE-EN-ISO 2431
Nadcap
Intergranular attack and end grain pitting
ASTM F2111, I+D-E-194, BATS 2545, BSS 7219, NE 41-013, BAC 5772, A2TS 2545
Total immersion corrosion test for aircraft chemicals
ASTM F483, A2TS 5415
Nadcap
Sandwich corrosion
ASTM F1110
Airbus DS
Nadcap
Double lap shear composites
AITM 1-0019, BSS 7202, BMS 5-154
Double lap shear composites
AITM 1-0019, BSS 7202, BMS 5-154
In-Plane Shear ±45º (non ambient temperature)
AITM 1-0002, ASTM D3518/D3518M, UNE-EN 6031
In-Plane Shear ±45º
AITM 1-0002, ASTM D3518/D3518M, ISO 14129, UNE-EN 6031
Interlaminar shear strength (non ambient temperature)
UNE-EN 2563, I+D-E-031, UNE-EN 2377, ASTM D2344/D2344M, ISO 14130, I+D-E-286, AITM 1-0047, I+D-E-255, A2TS 3464
Interlaminar shear strength
UNE-EN 2563, I+D-E-031, UNE-EN 2377, ASTM D2344/D2344M, ISO 14130, I+D-E-286, AITM 1-0047, I+D-E-255, BATS 3464, A2TS 3464
Single lap shear composites (non ambient temperature)
AITM 1-0019, ISO 4587, ASTM D3165
Single lap shear composites (non ambient temperature)
AITM 1-0019, ISO 4587, ASTM D3165
Single lap shear composites
AITM 1-0019, ISO 4587, ASTM D3165, UNE-EN 2243-1, BMS 5-129
Single lap shear composites
AITM 1-0019, ISO 4587, ASTM D3165, UNE-EN 2243-1, BMS 5-129
Single lap shear metal-metal (non ambient temperature)
UNE-EN 2243-1, I+D-E-127, ASTM D1002, BSS 7202, UNE-EN 1465, AITM 1-0030, BATS 3460, ISO 4587, IGC 04.26.345, ASTM D3165, BATS 3461, BSS 7272, A2TS 3460, A2TS 3870
Single lap shear metal-metal (non ambient temperature)
UNE-EN 2243-1, I+D-E-127, ASTM D1002, BSS 7202, UNE-EN 1465, AITM 1-0030, BATS 3460, ISO 4587, IGC 04.26.345, ASTM D3165, BATS 3461, BSS 7272, A2TS 3460, A2TS 3870
Single lap shear metal-metal
UNE-EN 2243-1, I+D-E-127, ASTM D1002, BSS 7202, UNE-EN 1465, AITM 1-0030, BATS 3460, ISO 4587, IGC 04.26.345, BATS 3461, RK-6619, BSS 7272, AS5127/1, DIN 65262-1, ASTM D3165, ISO 14273, A2TS 3460, A2TS 3870, A2TS 3461
Single lap shear metal-metal
UNE-EN 2243-1, I+D-E-127, ASTM D1002, BSS 7202, UNE-EN 1465, AITM 1-0030, BATS 3460, ISO 4587, IGC 04.26.345, BATS 3461, RK-6619, BSS 7272, AS5127/1, DIN 65262-1, ASTM D3165, ISO 14273, A2TS 3460, A2TS 3870, A2TS 3461
UNE-EN 542, ASTM D1622, UNE-EN ISO 1183-1, ISO 2781
Density
ISO 2781, UNE-EN ISO 1183-1, ASTM D792
Apparent density of solid samples
ASTM D1622, UNE-EN ISO 845, BMS 8-338, BAMS 532-002
Density of silicone foam rubber
BMS 1-68
Airbus DS
Nadcap
Laminate Density (NTA62470 \ NTA62471)
UNE-EN 2557, UNE-EN 2329, prEN 3003, ASTM D3776/D3776M, I+D-E-123, UNE-EN 2667-3, EFA-CFC-TP-021, BATS 4265, BATS 4561, BATS 4565, BATS 4765, HJPS-T014, I+D-E-124, BMS 5-154, I+D-E-242
Laminate Density
UNE-EN 2557, UNE-EN 2329, prEN 3003, ASTM D3776/D3776M, I+D-E-123, UNE-EN 2667-3, EFA-CFC-TP-021, BATS 4265, BATS 4561, BATS 4565, BATS 4765, HJPS-T014, I+D-E-124, BMS 5-154, I+D-E-242
Density of liquid samples
ISO 2811-1, UNE-EN 542, BMS 8-301, ASTM D1875
Density of liquid samples
ISO 2811-1, ASTM D1475
Density of liquid samples
ISO 2811-1, ASTM D1475
Density of liquid samples
ISO 2811-1, ASTM D1475
Qualitative determination of non metallic materials for FTIR
AITM 3-0003, ASTM E1252
Qualitative determination of non metallic materials for FTIR
AITM 3-0003, ASTM E1252
Alpha case determination in titanium alloys
BATS 2561, EN 2003-009, A2TS 2561
Nadcap
Determination of density (honeycomb core)
ASTM C271/C271M
Nadcap
Determination of non hardening characteristic of sealant
AITM 1-0032
Airbus DS
Nadcap
Determination of the extent of cure by DSC
AITM 3-0008, ASTM E2602, ASTM E2160, ASTM D3417, ASTM D3418, UNE-EN 6064
Determination of the extent of cure by DSC
AITM 3-0008, ASTM E2602, ASTM E2160, ASTM D3417, ASTM D3418, UNE-EN 6064
Tack
EFA-CFC-TP-025, I+D-E-123, I+D-E-124, I+D-E-242, GMS-122025, GMS 122026 , MEP 15-008, BATS 4766, BATS 4566, MEP 15-008 Apdo. 6.2.4.7, SCD01508, SCD01644, SAE-AMS 6891
Determination of orange peel
AITM 1-0054
Nadcap
Extrudability
AITM 7-0003, MIL-A-46146, T-PE-0087, BMS 5-28, BMS 3-38
Determination of the glass transition temperatures (DMA)
AITM 1-0003, ASTM D7028, BATS 4031, UNE-EN 6032, GPS-66203 , ASTM E1640, ASTM D5418, A2TS 4031
Determination of the glass transition temperatures (DMA)
AITM 1-0003, ASTM D7028, BATS 4031, UNE-EN 6032, GPS-66203 , ASTM E1640, ASTM D5418, A2TS 4031
Determination of the resin content and fiber areal weight
UNE-EN 2559, UNE-EN 2331, EFA-CFC-TP-021, BATS 4765, I+D-E-123, I+D-E-124, BSS 7336, ISO 1172, BATS 4061, BATS 4561, BATS 4761, HJPS-T015-B, I+D-E-242
Determination of the resin and metal mesh mass
UNE-EN 2331
Determination of extracting material
I+D-N-400 Z-24.257/1
Airbus DS
Determination to areal weight
UNE-EN 2557, UNE-EN 2329, prEN 3003, ASTM D3776/D3776M, I+D-E-123, UNE-EN 2667-3, EFA-CFC-TP-021, BATS 4265, BATS 4561, BATS 4565, BATS 4765, HJPS-T014, I+D-E-124, BMS 5-154, BMS 5-90, I+D-E-242, BMS 5-101, BATS 4461, UNE- EN 12127, A2TS 4461, A2TS 4265, BMS 5-129
Determination to areal weight
UNE-EN 2557, UNE-EN 2329, prEN 3003, ASTM D3776/D3776M, I+D-E-123, UNE-EN 2667-3, EFA-CFC-TP-021, BATS 4265, BATS 4561, BATS 4565, BATS 4765, HJPS-T014, I+D-E-124, BMS 5-154, BMS 5-90, I+D-E-242, BMS 5-101, BATS 4461, UNE- EN 12127, A2TS 4461, A2TS 4265, BMS 5-129
Determination of tg (DMA) (ISO 6721)
ISO 6721-11
Determination of tg (DMA) (ISO 6721)
ISO 6721-11
Determination of Tg and extent of cure by MDSC
ASTM E2602, ISO 11357-2
Determination of Tg and extent of cure by MDSC
ASTM E2602, ISO 11357-2
Torque determination by manual wrench
T&L-PE-0008, NASM 1312-31, ASTM D5649
Determination of delta ferrite content
SAE-AMS2315
Nadcap
Determination of the fiber, resin and void contents.
UNE-EN 2564, ASTM D3171, ASTM D2734, BATS 4710, I+D-E-124, ISO 1172, MEP 15-008, ASTM D2584, MEP 15-047, ABT 1-0018, A2TS 4710, A2TS 4711
ISO 1172, ISO 7822
Determination of pore content in FRP by microscopical examination
AITM 4-0003, T&L-PE-135
Nadcap
Determination of the volatile content
UNE-EN 2558, UNE-EN 2330, EFA-CFC-TP-022, IGC 04.26.200, I+D-E-123, I+D-E-124, BSS 7337, BATS 4262, BATS 4762 , BATS 4962, ASTM D3530, HJPS-T014, BSS 7216, I+D-E-242, BMS 8-289
Flow (class C)
AS5127/1, DIN 65262-1
Determination of slump
AITM 2-0033, MIL-PRF-81733, BSS 7226, AS5127/1, MIL-A-46106, BAMS 532-002, A2MS 532-002
Determination of slump
AITM 2-0033, MIL-PRF-81733, BSS 7226, AS5127/1, MIL-A-46106, BAMS 532-002
Determination the impregnation level of prepreg materials
AITM 2-0061
Nadcap
Anodic coating weight determination
ISO 2106, ASTM B137, BATS 5532, A2TS 5532
Tack free time
AITM 2-0034, DIN 65262-1, BSS 7278, MIL-A-46106, SAE-AMS-S-4383, BMS 5-95, AS5127/1, MIL-A-46146, ASTM D2377, A-A-52408, TH 14.5165
Colour difference
ISO 7724-3, UNE 48073-3, ASTM D2244, UNE-EN ISO 11664-4, AITM 2-0027
Hardness
ASTM E18, ISO 6508-1, ISO 6507-1, ASTM E10 (type A device), ASTM E92, ISO 6506-1 (type A device), ISO 9015-1, ISO 9015-2
Shore A hardness
ISO 7619-1, ASTM D2240, ISO 868, DIN 65262-1, T-PE-0041, AITM 1-0033, AS5127/1, ISO 48-4
Vickers hardness
ISO 6507-1, ISO 9015-1, ISO 9015-2
Sealing efficiency
ISO 2143, BATS 5076, A2TS 5076
UNE-EN ISO 1520
Nadcap
Slow deformation
UNE-EN ISO 1520
Nadcap
Shear joint test
TAE-CS-SP-160007
Airbus DS
Nadcap
Notched bar impact testing of metallic materials (non ambient temperature)
ISO 148-1, ASTM E23, ASTM A370 Par. 20-29
Nadcap
Notched bar impact testing of metallic materials
ISO 148-1, ASTM E23, ASTM A370 Par. 20-29, BATS 3080
Nadcap
Bend test - flexibility (cylindrical mandrel)
ISO 1519, ASTM E290, ASTM D522/D522M, BAMS 565-007, AITM 1-0020, SAE-AMS 3095, IGC 04.26.500, A2MS 565-009, A2MS 565-007
Hardness and electrical conductivity testing of metals
BAPS 168-013
Airbus DS
Nadcap
Artificial weathering. Measurement of the specular gloss
ISO 2813, SAE-AMS 3095
Honeycomb sheet thickness
AIMS 11-01-000 Part 1
Nadcap
Heat stability
ISO 1519, SAE-AMS 3095
Heat Stability. Bend test - flexibility (cylindrical mandrel)
ISO 1519, SAE-AMS 3095
Handleability check
AIMS 05-02-000 Parte 1
Nadcap
Dimensional control of V-notched specimens for Charpy test
ISO 148-1, ASTM E23, NR 216 DT
Nadcap
Intermediate evaluation
UNE-EN 3665, BAPS 160-045, NE 40-308, AITM 5-0016, A2PS 160-045
Macroghaphic evaluation of resistance welding
I+D-P-182, AWS D17.2/D17.2M, ISO 17639
Nadcap
Macroscopic-Microscopic examination of welding joints
UNE 7-364-78 (UNE 7364), ISO 17639, ASME BPVC.IX, A2TS 2752
Nadcap
Exposure to humid atmosphere of fiber reinforced plastics
UNE-EN 2823, EN 3615, ASTM D5229/D5229M, I+D-E-240
Exposure to light sources - fluorescent UV lamps
ISO 16474-1, ISO 16474-3, ASTM G154, ISO 4892-1, ISO 4892-3
Nadcap
Exposure to light sources - fluorescent UV lamps
ISO 16474-1, ISO 16474-3, ASTM G154, ISO 4892-1, ISO 4892-3
Nadcap
Manufacture of monolithic parts with thermoset prepreg materials
AIPI 03-02-019, AIPS 03-02-019
Airbus DS
Nadcap
Manufacture of monolithic parts with thermoset prepreg materials
AIPI 03-02-019, AIPS 03-02-019
Airbus DS
Nadcap
Manufacture of monolithic parts with thermoset prepreg materials
AIPI 03-02-019, AIPS 03-02-019
Airbus DS
Nadcap
Manufacture of structural sandwich parts with thermosetting fibre reinforced skins
AIPI 03-02-018, AIPS 03-02-018
Airbus DS
Nadcap
Manufacture of structural sandwich parts with thermosetting fibre reinforced skins
AIPI 03-02-018, AIPS 03-02-018
Airbus DS
Nadcap
Manufacture of Reference standards for non-destructive inspection methods on fibre composites
I+D-P-233, AITM 6-0012
Airbus DS
Nadcap
Manufacture of Reference standards for non-destructive inspection methods on fibre composites
I+D-P-233, AITM 6-0012
Airbus DS
Nadcap
Etch rate
BATS 5410, I+D-P-072
Airbus DS
Nadcap
ASTM D1210, ISO 1524
Nadcap
Fineness of grind
ASTM D1210, ISO 1524
Nadcap
Flexibility (Honeycomb Class I, Type III)
GMS 122026 , GMS-122025
Airbus DS
Nadcap
Flexure of composite laminates
ASTM D790, A2TS 3440, ISO 6872, UNE-EN ISO 14125
Nadcap
Beam flexure of sandwich construction
ASTM C393/C393M , SAE-AMS-STD-401 Par. 5.2.4, prEN 6061, BATS 3470, ASTM D7249/D7249M, A2TS 3470
Nadcap
Resin flow
UNE-EN 2560, UNE-EN 2332, BATS 4763, BATS 4263, I+D-E-123, I+D-E-124, BSS 7335, I+D-E-242, MEP 15-008, ASTM D3531/D3531M, BATS 4563
Eutectic melting
I+D-P-220, BAC5602, NE 40-002, BATS 2521, SAE-AMS2772, T-PE-0002, BPS-4139, AWPS006T, A2TS 2521
Nadcap
Degree of curing
ASTM D5402, MIL-PRF-85285, TT-P-2760A, A2PS 138-055, BAPS 138-055
Staking retention test on bearings
NE 07-041 , NE 31-002 , AIPS 03-03-012
Nadcap
Specific Gravity
BMS 5-45, MIL-PRF-81733, BATS 4314, AS5127/1
Specific gravity, apparent, of liquid samples
ASTM D891 , UNE-EN 542
Identification of surface protection
T-PE-0005, T-PE-0119
Airbus DS
Nadcap
Material identification
T-PE-0119, T-PE-0005
Airbus DS
Nadcap
Impact (CAI-TAI)
AITM 1-0010, AITM 1-0077, UNE-EN 6038
Water immersion of the test samples
ISO 2812-2, ISO 1817
Water immersion of the test panels
ISO 2812-2, BAMS 565-002, BATS 4860, MIL-PRF-85285, I+D-E-103, BAMS 565-010, BAMS 565-014, BAMS 565-018, BSS 7225, BMS 10-86, MIL-PRF-23377, TT-P-2760, TN-A-007-10012, NE 40-143, BMS 10-60, BAMS 565-008, NE 40-164, CMS-CT-201, MEP 10-059, NE 40-308, NE 40-274, BAMS 565-016, BAMS 552-003, A2MS 565-002, A2MS 565-001, IGC 04.26.505, A2TS 4860, A2MS 565-009, BAMS565-001, MEP 10-070, FED-STD-141, A2MS 565-012, A2MS 565-014, A2MS 565-010, BAMS 565-001, A2MS 565-018, A2MS 565-016, NE 40-333
Fluid immersion of the test samples
BATS 6304, BMS 5-45, A2TS 6304, ISO 1817
Airbus DS
Fluid immersion of the test panels
NE 40-164, BAMS 565-002, ISO 2812-1, BAMS 565-014, BAMS 565-010, BAMS 565-018, BMS 10-79, BAMS 565-008, BAMS 565-013, SAE-AMS 3095, CMS-CT-201, BAMS 565-007, BAMS565-001, BMS 10-11, BMS 10-60, MEP 10-070, BAMS 565-016, BAMS 552-003, A2MS 565-002, A2MS 565-001, A2MS 565-012, A2MS 565-009, A2MS 565-014, A2MS 565-010, BAMS 565-001, A2MS 565-018, A2MS 565-007, A2MS 565-016
Metallographic examination
ASTM E3, ASTM E407, ASTM E340, BATS 6100, ASTM A604/A604M, EN 3114-001, I+D-P-225, ASTM E381, A2TS 6100
Metallographic examination
ASTM E3, ASTM E407, ASTM E340, BATS 6100, ASTM A604/A604M, EN 3114-001, I+D-P-225, ASTM E381, A2TS 6100
Metallographic examination
ASTM E3, ASTM E407, ASTM E340, BATS 6100, ASTM A604/A604M, EN 3114-001, I+D-P-225, ASTM E381, A2TS 6100
Visual examination
T-PE-0110, BATS 2333, A2TS 2333
Airbus DS
Nadcap
Visual inspection
Visual, I+D-P-111, BATS 2333
Airbus DS
Nadcap
Visual inspection of flared samples
T-PE-0110
Airbus DS
Nadcap
Visual inspection of bended samples
T-PE-0110
Airbus DS
Nadcap
Visual inspection of laminated shim stocks after water immersion
T-PE-0110
Airbus DS
Nadcap
Visual inspection of surface treatments
I+D-P-111, I+D-P-416, AIPI 02-01-006, AIPS 02-01-006, AIPI 02-01-003, AIPS 02-01-003, I+D-P-040, AIPI 02-01-002, AIPS 02-01-002
Airbus DS
Nadcap
Visual Inspection in Carbon Fiber Composites
UNE EN 13018
Airbus DS
Nadcap
Installation of parallel shank threaded fasteners
AIPI 01-02-022, AIPS 01-02-022
Airbus DS
Nadcap
Installation of parallel shank threaded fasteners
AIPI 01-02-022, AIPS 01-02-022
Airbus DS
Nadcap
Installation of parallel shank threaded fasteners
AIPI 01-02-022, AIPS 01-02-022
Airbus DS
Nadcap
AITM 3-0003, ASTM E1252
AITM 3-0003, ASTM E1252
Carrier areal weight
UNE-EN 2559, UNE-EN 2331, AITM 3-0002, UNE-EN 6041
Nonvolatile matter in volatile solvents
ASTM D1353
Nadcap
Machining of pull-out in fastener joints of composite
ABS0254, ABS0258, AITM 1-0066, prEN 6114
Nadcap
Machining of charpy in metallic material
ISO 148-1, ASTM E23, NR 216 DT, LR-0001
Nadcap
Machining of compression in composite laminates
UNE-EN 2850, I+D-E-051, UNE-EN 2850, BSS 7260
Machining of compression of laminates with hydraulic clamping
AITM 1-0008, ASTM D6641/D6641M , ISO 14126, ASTM D3410/D3410 M
Machining of compression after impact (CAI) in composite laminates
AITM 1-0010, AITM 1-0077
Machining of fibre, resin and void contents in composite laminates
UNE-EN 2564, ASTM D2734, BATS 4710, ASTM D3171, BSS 7336
Machining of double lap shear in composite joints
AITM 1-0019
Machining of In-Plane Shear ±45º
AITM 1-0002, ASTM D3518/D3518M, ISO 14129, UNE-EN 6031, UNE-EN 6031
Machining of interlaminar shear in composite laminates
UNE-EN 2563, I+D-E-031, UNE-EN 2377, ASTM D2344/D2344M, ISO 14130, I+D-E-286, AITM 1-0047, I+D-E-255, A2TS 3464
Machining of single lap shear in metallic joints
UNE-EN 2243-1, I+D-E-127, ASTM D1002, AITM 1-0030, BATS 3460, ISO 4587, BSS 7202, IGC 04.26.345, RK-6619, A2TS 3460, A2LS 9401
Machining of single lap shear in composite joints
AITM 1-0019, UNE-EN 2243-1, BMS 5-129
Machining of DMA in composite laminates
AITM 1-0003, BATS 4031, UNE-EN 6032, ASTM D7028, ISO 6721-11, ASTM E1640, ASTM D5418, A2TS 4031
Machining of GIc in composite joints
I+D-E-290, AITM 1-0005, AITM 1-0053
ISO 37, DIN 65262-1, DIN 53504, ASTM D412, AS5127/1
Machining of bell peel in metallic joints
I+D-E-128, UNE-EN 2243-2, ISO 4578, AITM 5-0009, ASTM D3167, BSS 7206
Machining of T-Peel
ASTM D1876
Nadcap
Machining of drum peel in composite laminates
ASTM D1781, I+D-E-130, UNE-EN 2243-3, IGC 04.26.270 , I+D-E-256, I+D-E-289, BSS 7206, BATS 3480, SAE-AMS-STD-401, A2TS 3480
Machining of bend in metallic material
ASTM E290, BATS 2312, AWS B4.0, ISO 5173, ASTM E190, ASME BPVC.IX, LR-0001
Nadcap
Machining of open hole tension in composite laminates
I+D-E-326, ABS0258, AITM 1-0007
Machining of tensile for round samples in metallic material
ASTM B557, ASTM B557M, ASTM E8/E8M, ISO 6892-1, ASTM A370, EN 2002-001, BATS 3000, ASME BPVC.IX, IGC 04.21.111
Machining of tensile for rectangular samples in metallic material
ASTM B557, ASTM B557M, ASTM E8/E8M, ISO 6892-1, ASTM A370, ISO 4136, EN 2002-001, BATS 3000, AWS B4.0, BLS-9302, ASME BPVC.IX, IGC 04.21.111, LR-0001, A2LS 9302
Machining of metal rectangular samples for mechanical tensile test
ASTM B557, ASTM B557M, ASTM E8/E8M, ISO 6892-1, ASTM A370, ISO 4136, EN 2002-001, BATS 3000, AWS B4.0, ASME BPVC.IX, NR 216 DT, LR-0001
Machining of tensile for tubular samples in metallic material
ASTM B557, ASTM B557M, ASTM E8/E8M, ISO 6892-1, ISO 4136, EN 2002-001, BATS 3000, ASME BPVC.IX
Machining of tensile test of composite laminates
UNE-EN 2561, UNE-EN 2597, I+D-E-026, ASTM D3039/D3039 M, ASTM D638-Plastics, ISO 527-4, AITM 1-0007, BSS 7320, I+D-E-284, ISO 527-5, EN 2747, I+D-E-253, EFA-CFC-TP-001
Machining of flatwise tensile in composite laminates
I+D-E-246, AITM 1-0025, I+D-E-258, ASTM C297/C297M, UNE-EN 2243-4, I+D-E-288, prEN 6062, SAE-AMS-STD-401, A2TS 3405
Machining of tensile after impact (TAI)
AITM 1-0010, AITM 1-0007
Machining of bearing in fastener joints of composite
I+D-E-325, UNE-EN 13706-2, AITM 1-0009
Nadcap
Thickness measurement of fiber composites by ultrasonic pulse-echo technique
T-PE-0107, AITM 6-0011, T-PE-0095, AITM 6-4005
Surface roughness measurement
AITM 1-0070, BATS 3211, A2TS 3211
Nadcap
Surface roughness measurement
AITM 1-0070, BATS 3211, A2TS 3211
Nadcap
Thickness measurement and variation
AITM 6-0012
Airbus DS
Nadcap
Thickness measurement
I+D-N-400 Z-24.231/4, I+D-N-400 Z-24.232/4, UNE-ISO 4593, ASTM D6988
Nadcap
Thickness measurement of Composite Parts
AITM 6-0012
Airbus DS
Nadcap
Laminate cured ply thickness (CPT)
UNE-ISO 4593, ASTM D6988, UNE-EN ISO 5084, BMS 8-256, I+D-E-243, EFA-CFC-TP-026, UNE-EN 2565, GPS-66201, HJPS-T015-B, SAE-AMS 6891, BMS8-212, BMS8-168, MEP 15-047, NTA-62470, NTA-62471, BATS 4712, A2TS 4712
Measurement of electrical resistance
AITM 2-0031, BMS 10-21
Nadcap
Measurement of the specular gloss
ISO 2813, ASTM D523, ASTM D2457
Thickness measurement of anodic layer by microscopical examination
ISO 1463, BATS 2550, A2TS 2550
Measurement of coating thickness
AITM 6-6006, ISO 2808, ISO 2360, BATS 4002, A2TS 4002, BSS 7413
Measurement of coating thickness
ASTM D1005, ISO 2808
Measurement of coating thickness by eddy current method
AITM 6-6006, ISO 2808, ISO 2360, BATS 4002, ASTM D7091
Measurement of coating thickness by eddy current method
AITM 6-6006, ISO 2808, ISO 2360, BATS 4002, ASTM D7091, ASTM B244, A2TS 4002, BSS 7413, ASTM B499
Thickness measurement by microscopical examination of a transverse cross section
ISO 2808, ISO 1463, BATS 2463, A2TS 2463, UNE-EN 2781
Thickness measurement by microscopical examination of a transverse cross section
ISO 2808, ISO 1463, BATS 2463, A2TS 2463, UNE-EN 2781
Etch rate measurement - alkaline pickling baths
AIPI 02-01-006, AIPS 02-01-006
Airbus DS
Nadcap
Adhesives, resins mixing and samples preparation
BMS 5-28, ASTM D1002
Sealants mixing
AITM 1-0033, AITM 2-0033, AITM 7-0003, AITM 2-0013, ASTM D2240, ISO 7619-1, AITM 1-0036, AITM 2-0034, MIL-A-46106, BSS 7257, BSS 7267, BSS 7278, SAE-AMS-S-4383, AITM 3-0025, MIL-PRF-81733, BMS 5-45, BSS 7226, BSS 7278, AS5127/1, ISO 2781, DIN 65262-1, MIL-A-46146
Microhardness HV1
ASTM E384, ISO 6507-1, ISO 9015-2
ISO 604
Compression Modulus test of composite laminates( T>23ºC)
UNE-EN 2850, I+D-E-051, BSS 7260
Compression Modulus test of composite laminates
UNE-EN 2850, I+D-E-051, BSS 7260, SRM 1R-94
General assembly and installation of fasteners
AIPI 01-02-017, AIPS 01-02-017
Airbus DS
Nadcap
General assembly and installation of fasteners
AIPI 01-02-017, AIPS 01-02-017
Airbus DS
Nadcap
General assembly and installation of fasteners
AIPI 01-02-017, AIPS 01-02-017
Airbus DS
Nadcap
Salt spray test - evaluation
ASTM B117, ISO 9227, BATS 5570, NASM 1312-1, ASTM D1654, AITM 5-0009, A2TS 5570, Eurocae ED-14G
Salt spray test - exposure
ASTM B117, ISO 9227, BATS 5570, NASM 1312-1, AITM 5-0009, A2TS 5570, Eurocae ED-14G
Morphology B observation of FRP laminates by optical microscopy
AITM 4-0005, T-PE-0085, ASTM E3, M21E/IMA
Nadcap
Hydrogen porosity
BATS 2520, BAC5602, NE 40-002, I+D-P-220, SAE-AMS2772, T&L-PE-0001, BPS-4139, AWPS006T, A2TS 2520
Nadcap
Torque tightening of screws, bolts and nuts
AIPI 01-02-008, AIPS 01-02-008
Airbus DS
Nadcap
Torque tightening of screws, bolts and nuts
AIPI 01-02-008, AIPS 01-02-008
Airbus DS
Nadcap
Torque tightening of screws, bolts and nuts
AIPI 01-02-008, AIPS 01-02-008
Airbus DS
Nadcap
I+D-E-128
Floating Roller Peel (non ambient temperature)
I+D-E-128, UNE-EN 2243-2, AITM 5-0009
Floating Roller Peel (non ambient temperature)
I+D-E-128, UNE-EN 2243-2, AITM 5-0009
Floating Roller Peel
I+D-E-128, UNE-EN 2243-2, ISO 4578, UNE-EN 1464 , ASTM D3167, AITM 5-0009, EN 1967, BSS 7206
Floating Roller Peel
I+D-E-128, UNE-EN 2243-2, ISO 4578, UNE-EN 1464 , ASTM D3167, AITM 5-0009, EN 1967, BSS 7206
Bead peel test
DIN 54457 , ISO 21194
Nadcap
Peel adhesion test of tape
ASTM D3330/D3330M, ASTM D1000
Nadcap
T- Peel test
ASTM D1876, DTD 5577
Nadcap
T- Peel test
ASTM D1876, DTD 5577
Nadcap
Climbing Drum Peel (non ambient temperature)
ASTM D1781, I+D-E-130, UNE-EN 2243-3, IGC 04.26.270
Climbing Drum Peel (non ambient temperature)
ASTM D1781, I+D-E-130, UNE-EN 2243-3, IGC 04.26.270
Climbing Drum Peel
ASTM D1781, I+D-E-130, UNE-EN 2243-3, IGC 04.26.270 , I+D-E-256, I+D-E-289, BSS 7206, BATS 3480, SAE-AMS-STD-401, A2TS 3480
Climbing Drum Peel
ASTM D1781, I+D-E-130, UNE-EN 2243-3, IGC 04.26.270 , I+D-E-256, I+D-E-289, BSS 7206, BATS 3480, SAE-AMS-STD-401, A2TS 3480
Dry coating weight
AIPS-05-02-015
Nadcap
Paint systems for test specimens
I+D-P-060, I+D-P-064, CASA-1089, I+D-P-358
Nadcap
Paint systems for test specimens
I+D-P-060, I+D-P-064, CASA-1089, I+D-P-358
Nadcap
Drape
GMS-122025, GMS 122026
Airbus DS
Nadcap
Bend testing of metallic material
ASTM E290, BATS 2312, ISO 5173, ASTM E190, DIN EN 2002-6 , ASME BPVC.IX, I+D-P-317, AIPS 02-03-008
Nadcap
Bend testing of a paint system (non ambient temperature)
AITM 1-0020
Compressive tube shear preparation
UNE-EN 2667-2, A2TS 6201
Surface preparation for thermosetting parts before structural bonding
AIPI 06-01-003, AIPS 06-01-003
Airbus DS
Nadcap
Surface preparation for thermosetting parts before structural bonding
AIPI 06-01-003, AIPS 06-01-003
Airbus DS
Nadcap
Surface preparation for thermosetting parts before structural bonding
AIPI 06-01-003, AIPS 06-01-003
Airbus DS
Nadcap
Mechanical surface preparation of non-structural adherend prior to adhesive bonding
AIPI 06-01-004, AIPS 06-01-004
Airbus DS
Nadcap
Mechanical surface preparation of non-structural adherend prior to adhesive bonding
AIPI 06-01-004, AIPS 06-01-004
Airbus DS
Nadcap
Mechanical surface preparation of non-structural adherend prior to adhesive bonding
AIPI 06-01-004, AIPS 06-01-004
Airbus DS
Nadcap
Mechanical surface preparation of non-structural adherend prior to adhesive bonding
AIPI 06-01-004, AIPS 06-01-004
Airbus DS
Nadcap
Inspection for confirmation of the anodising process
AITM 6-9004, I+D-P-111
Nadcap
Cross-cut adhesion test-copia
ISO 2409, ASTM D3359, BATS 4860, AIPI 05-05-009, FED-STD-141
Fillet radius and transition zone
I+D-P-152, PPS 42.01, BAC 5772, AIPS 09-03-001
Nadcap
Chromate conversion coating
AIPI 02-05-001, AIPS 02-05-001, I+D-P-202, BAC5719
Airbus DS
Nadcap
Chromate conversion coating
AIPI 02-05-001, AIPS 02-05-001, I+D-P-202, BAC5719
Airbus DS
Nadcap
Chromate conversion coating
AIPI 02-05-001, AIPS 02-05-001, I+D-P-202, BAC5719
Airbus DS
Nadcap
Chromate conversion coating
AIPI 02-05-001, AIPS 02-05-001, I+D-P-202, BAC5719
Airbus DS
Nadcap
Compression stress test of composite laminates (T>23ºC)
UNE-EN 2850, I+D-E-051, BSS 7260
Compression stress test of composite laminates
UNE-EN 2850, I+D-E-051, BSS 7260, SRM 1R-94
Compression stress test of rigid plastics
ASTM D695, ISO 604, DIN 65064, ISO 3386-1/Amd 1
Compression stress test of rigid plastics
ASTM D695, ISO 604, DIN 65064, ISO 3386-1/Amd 1
Insert Shear strength
BMS 5-107
Airbus DS
Nadcap
Fluid resistance - adherence
BATS 4860, ISO 2409, ISO 2812-1, BAMS 565-013, ASTM D3359, ASTM D2510, BAMS 552-003, A2TS 4860, A2MS 565-014
Fluid resistance - adhesion of coatings by scrape adhesion
ASTM D2197
Nadcap
Fluid resistance - aspect
NE 40-164, BAMS 565-002, ISO 4628-2, ISO 2812-1, BAMS 565-010, BAMS 565-014, BAMS 565-018, BMS 10-86, BAMS 565-008, BAMS 565-013, SAE-AMS 3095, BAMS 565-007, ASTM D714, ISO 4628-1, ISO 4628-4, ISO 4628-5, ISO 4628-6, BAMS565-001, Visual, MEP 10-070, BAMS 565-016, A2MS 565-002, A2MS 565-001, A2MS 565-012, A2MS 565-009, A2MS 565-014, BAMS 565-001, A2MS 565-018
Fluid resistance - pencil hardness
NE 40-164, BAMS 565-002, BAMS 565-014, BSS 7263, ASTM D3363, BAMS 565-018, BAMS 565-008, BAMS 565-013, CMS-CT-201, A2MS 565-001, A2MS 565-009, A2MS 565-014, MEP 10-070, BAMS 565-001
Airbus DS
Fluid resistance - scratch
ISO 1518-1, ISO 2812-1
ISO 604
ISO 604
Compression strength after impact (T>23ºC)
AITM 1-0010, AITM 1-0077, UNE-EN 6038
Compression strength after impact
AITM 1-0010, AITM 1-0077, UNE-EN 6038
Filiform corrosion resistance
UNE-EN 3665, NE 40-308, A2PS 160-045, AITM 5-0016
UNE-EN 2243-1
UNE-EN 2243-1
UNE-EN 2243-1, ASTM D1002
UNE-EN 2243-1, BSS 7202
Temperature resistance
BAMS 565-013, ASTM D3359
Resistance to water - adherence
ISO 2812-2, ISO 2409, BATS 4860, BAMS 565-002, ASTM D3359, AIPI 05-05-009, TN-A-007-10012, BAMS 565-008, NE 40-164, SAE-AMS 3095, BAMS 552-003, IGC 04.26.490, MEP 10-070, A2TS 4860, A2MS 565-014
Resistance to water - adhesion of coatings by scrape adhesion
ASTM D2197, BMS 10-86
Resistance to water - aspect
ISO 2812-2, ISO 4628-1, ISO 4628-2, BAMS 565-002, ASTM D714, BAMS 565-010, BAMS 565-014, BAMS 565-018, NE 40-164, A2MS 565-002, A2MS 565-001, IGC 04.26.505, ISO 4628-4, ISO 4628-5, ISO 4628-6, TN-A-007-10012, BAMS565-001, Visual, A2MS 565-012, A2MS 565-014, BAMS 565-001, A2MS 565-018
Resistance to water - pencil hardness
BAMS 565-018, ASTM D3363, MEP 10-070
Airbus DS
Resistance to water - scratch
ISO 2812-2, ISO 1518-1, IGC 04.26.505, IGC 04.26.495, TN-A-007-10012
Impact resistance
ASTM D2794, BATS 4866, BAMS 565-002, MEP 10-069, ISO 6272-1, BAMS 565-014, NE 40-308, A2MS 565-014
Pin-bearing strength
UNE-EN 13706-2
Airbus DS
Nadcap
Peel strength at 180°
AITM 2-0013, BATS 3488, BSS 7257, AS5127/1, AITM 7-0006, DIN 65262-1, SAE-AMS3265, A2TS 3488
Peel strength at 180° of adhesive bonds
UNE-EN ISO 8510-2, ASTM D903
Airbus DS
Peel strength at 180° of adhesive bonds
UNE-EN ISO 8510-2, ASTM D903
Airbus DS
Scratch resistance
ISO 1518-1
Reticulation (solvent resistance)
I+D-E-299, ASTM D5402, AITM 1-0024
Reticulation (solvent resistance)
I+D-E-299, ASTM D5402, TT-P-2760, AITM 1-0024, NE 40-143, SAE-AMSC27725, NE 40-274
Susceptibility to intergranular corrosion
NE 40-002, ASTM G110, T&L-PE-0022, BATS 2525, SAE-AMS2772, AIMS 03-04-000, DIN-EN-2716, QVA-Z10-59-03, BPS-4139, AWPS006T, IGC 04.24.103, A2TS 2525
Nadcap
Preparation of holes in fibre reinforced plastic (FRP) and hybrid materials
AIPI 01-02-005, AIPS 01-02-005
Airbus DS
Nadcap
Preparation of holes in fibre reinforced plastic (FRP) and hybrid materials
AIPI 01-02-005, AIPS 01-02-005
Airbus DS
Nadcap
Preparation of holes in fibre reinforced plastic (FRP) and hybrid materials
AIPI 01-02-005, AIPS 01-02-005
Airbus DS
Nadcap
Honeycomb cell size
AIMS 11-01-000 Part 1
Nadcap
Grain size
ASTM E112, A2TS 2501
Interlaminar fracture toughness GIc (non ambient temperature)
AITM 1-0053, AITM 1-0005, UNE-EN 6033
Interlaminar fracture toughness GIc (non ambient temperature)
AITM 1-0053, AITM 1-0005, UNE-EN 6033
Interlaminar fracture toughness GIc
AITM 1-0053, AITM 1-0005, I+D-E-290, UNE-EN 6033
Interlaminar fracture toughness GIc
AITM 1-0053, AITM 1-0005, I+D-E-290, UNE-EN 6033
AITM 7-0003, AS5127/1
Application time (extrusion)
AITM 7-0003, MIL-PRF-81733, AS5127/1, MIL-A-46146, DIN 65262-1, TH 14.5165
Application time (viscosity)
AITM 7-0003, DIN 65262-1, AS5127/1, BMS 5-45, ASTM D2556, ISO 2555, TH 14.5165
Application time
BMS 8-338, CMS-554-01 , BAMS 554-001, A2MS 554-001
Airbus DS
Nadcap
Cure time
AITM 1-0033, ASTM D2240, ISO 7619-1, DIN 65262-1, ISO 868, BMS 5-45, BMS 5-95, AS5127/1, BMS 5-63 , TH 14.5165
Cure time
AITM 1-0033, ASTM D2240, ISO 7619-1, DIN 65262-1, ISO 868, BMS 5-45, BMS 5-95, AS5127/1, BMS 5-63 , TH 14.5165
Assembly time (class C)
AS5127/1, DIN 65262-1
Assembly time
AITM 1-0036
Airbus DS
Nadcap
Gel time (Room Temperature)
BMS 8-301, BMS 5-28, MS050007E
Airbus DS
Drying time
ISO 9117-3, FED-STD-141, ASTM D1640/D1640M, ISO 9117-6, SAE-AMS 3095, ASTM D5895 , ISO 9117-1, BATS 4817, SAE-AMSC27725, BATS 4843, IGC 04.26.480, A2TS 4843
AITM 2-0034, AS5127/1
ISO 2431, ASTM D1200, ASTM D4212, ASTM D2471
Nadcap
Pot life
ISO 2431, ASTM D1200, ASTM D4212, Pintado, UNE-EN ISO 9514, MEP 10-069, BSS 7234, Visual, UNE-EN-ISO 2431, FED-STD-141
Pot life
ISO 2431, ASTM D1200, ASTM D4212, Pintado, UNE-EN ISO 9514, MEP 10-069, BSS 7234, Visual, UNE-EN-ISO 2431, FED-STD-141
Pot life of mixed components
ASTM D2471, BAMS 532-002
Nadcap
Verification of Testing Frame and Specimen Alignment
ASTM E1012
Airbus DS
Nadcap
Verification of Testing Frame and Specimen Alignment
ASTM E1012
Airbus DS
Nadcap
Tension through the hole (T>23ºC)
I+D-E-304, AITM 1-0067
Nadcap
Tension through the hole
I+D-E-304, AITM 1-0067
Nadcap
Tensile test of composite laminates (T>23ºC)
UNE-EN 2561, I+D-E-026, UNE-EN 2597, AITM 1-0007, ASTM D3039/D3039 M, I+D-E-253, SRM 4R-94
Tensile test of composite laminates
UNE-EN 2561, I+D-E-026, UNE-EN 2597, ASTM D3039/D3039 M, UNE-EN ISO 10618, ISO 527-4, AITM 1-0007, I+D-E-284, ISO 527-5, EN 2747, I+D-E-253, EFA-CFC-TP-001, BSS 7320, UNE-EN 6035, ASTM D638-Composite, SRM 4R-94
Tension by-pass (T>23ºC)
I+D-E-326, AITM 1-0007
Tension by-pass
I+D-E-326, AITM 1-0007, UNE-EN 6035, IGC 04.26.260
Pull out strength of mechanical joints (T>23ºC)
AITM 1-0066, I+D-E-305
Nadcap
Pull out strength of mechanical joints
AITM 1-0066, I+D-E-305
Nadcap
Tensile strength of butt joints (non ambient temperature)
UNE-EN 15870
Nadcap
Tensile strength of butt joints (non ambient temperature)
UNE-EN 15870
Nadcap
Tensile strength of butt joints
UNE-EN 15870, ASTM C633, ASTM D2095
Nadcap
Tensile strength of butt joints
UNE-EN 15870, ASTM C633, ASTM D2095
Nadcap
Flatwise tensile (non ambient temperature)
AITM 1-0025, I+D-E-258, I+D-E-246, UNE-EN 2243-4, ASTM C297/C297M, I+D-E-288, prEN 6062, BSS 7205, SAE-AMS-STD-401
Flatwise tensile (non ambient temperature)
AITM 1-0025, I+D-E-258, I+D-E-246, UNE-EN 2243-4, ASTM C297/C297M, I+D-E-288, prEN 6062, BSS 7205, SAE-AMS-STD-401
Flatwise tensile
AITM 1-0025, I+D-E-258, I+D-E-246, UNE-EN 2243-4, ASTM C297/C297M, I+D-E-288, prEN 6062, BSS 7205, SAE-AMS-STD-401, A2TS 3405
Flatwise tensile
AITM 1-0025, I+D-E-258, I+D-E-246, UNE-EN 2243-4, ASTM C297/C297M, I+D-E-288, prEN 6062, BSS 7205, SAE-AMS-STD-401, A2TS 3405
Tension testing of metal round specimen
ASTM B557, ASTM B557M, ASTM E8/E8M, ISO 6892-1, ASTM A370, ASTM F606/F606M, EN 2002-001, BATS 3000, BATS 3001, BATS 3002, IGC 04.21.111, A2TS 3000, A2TS 3002, A2TS 3001
Tension testing of metal rectangular specimen
ASTM B557, ASTM B557M, ASTM E8/E8M, ISO 6892-1, ASTM A370, EN 2002-001, BATS 3000, BATS 3001, BATS 3002, IGC 04.21.111, A2TS 3000, A2TS 3001, A2TS 3002
Tension testing of metal rectangular specimen with curvature
ASTM B557, ASTM B557M, ASTM E8/E8M, ISO 6892-1, ASTM A370, ISO 4136, EN 2002-001, BATS 3000, BATS 3001, BATS 3002
Tension testing of plastic rectangular specimen (non ambient temperature)
ASTM D638-Plastics, ASTM D882, UNE-EN ISO 527-2, ISO 37, DIN 53504, ISO 527-3, ASTM D412
Nadcap
Tension testing of plastic rectangular specimen (non ambient temperature)
ASTM D638-Plastics, ASTM D882, UNE-EN ISO 527-2, ISO 37, DIN 53504, ISO 527-3, ASTM D412
Nadcap
Tension testing of plastic rectangular specimen
ASTM D638-Plastics, ASTM D882, ISO 527-3, UNE-EN ISO 527-2, DIN 53504, ASTM D412, ISO 37
Nadcap
Tension testing of plastic rectangular specimen
ASTM D638-Plastics, ASTM D882, ISO 527-3, UNE-EN ISO 527-2, DIN 53504, ASTM D412, ISO 37
Nadcap
Tension testing of metal tubular specimen
ASTM B557, ASTM B557M, ASTM E8/E8M, ISO 6892-1, ASTM A370, ASTM F606/F606M, EN 2002-001, BATS 3000, BATS 3001, BATS 3002
Tension testing on welds of metal rectangular specimen
ASTM E8/E8M, ISO 6892-1, ISO 4136, ASTM A370, ASME BPVC.IX
ISO 2555, ASTM D2196
ISO 2431, ASTM D1200, ASTM D4212, ISO 12058-1
Nadcap
ISO 2431, ASTM D1200, ASTM D4212, BSS 7234, UNE-EN-ISO 2431
Nadcap
ISO 2431, ASTM D1200, ASTM D4212, UNE-EN-ISO 2431, ISO 12058-1
Nadcap
ISO 2431, ASTM D1200, ASTM D4212
Nadcap
Viscosity. Determination of time by use of flow cups
ISO 2431, ASTM D1200, ASTM D4212, UNE-EN-ISO 2431, MEP 10-069, BSS 7234, ASTM D1084, ASTM D3794
Viscosity. Determination using a falling-ball viscometer
ISO 12058-1, UNE-EN ISO 12058-1/AC
Nadcap
Viscosity. Determination using a single cylinder type rotational viscometer method
ISO 2555, ASTM D2393, ASTM D2196, BATS 4385, BAMS 552-003
Viscosity. Determination using a single cylinder type rotational viscometer method
ISO 2555, ASTM D2393, ASTM D2196, BATS 4385, BAMS 552-003
Viscosity. Determination using a single cylinder type rotational viscometer method
ISO 2555, AS5127/1, ASTM D2196, BMS 5-95, ASTM D2556, MIL-PRF-81733, DIN 65262-1, BATS 4385
Fiber Volume (Laminate)
BATS 4710, NTA-62470, SRM 10R-94, MEP 15-047, ASTM D3171, I+D-E-123, NTA-62471, A2TS 4710
Wedge crack extension test
ASTM D3762, I+D-E-301, BSS 7448, BAC5555
Nadcap
José Rodríguez
José Rodríguez Laboratory Manager
639 196 189
jose.rodriguez@titania.aero